Errors found while checking this document as SVG 1.1!

Result: 42 Errors, 1 warning(s)
:
: utf-8
: SVG 1.1
Root Element: svg
Root Namespace: http://www.w3.org/2000/svg
Options

Help on the options is available.

Notes and Potential Issues

The following notes and warnings highlight missing or conflicting information which caused the validator to perform some guesswork prior to validation, or other things affecting the output below. If the guess or fallback is incorrect, it could make validation results entirely incoherent. It is highly recommended to check these potential issues, and, if necessary, fix them and re-validate the document.

  1. Warning DOCTYPE Override in effect!

    The DOCTYPE Declaration for "SVG 1.1" has been inserted at the start of the document, but even if no errors are shown below the document will not be Valid until you add the new DOCTYPE Declaration.

↑ Top

Validation Output: 42 Errors

  1. Error Line 15, Column 21: there is no attribute "sodipodi:version" 
       sodipodi:version="0.32"

    ✉

    You have used the attribute named above in your document, but the document type you are using does not support that attribute for this element. This error is often caused by incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Transitional" document type to get the "target" attribute), or by using vendor proprietary extensions such as "marginheight" (this is usually fixed by using CSS to achieve the desired effect instead).

    This error may also result if the element itself is not supported in the document type you are using, as an undefined element will have no supported attributes; in this case, see the element-undefined error message for further information.

    How to fix: check the spelling and case of the element and attribute, (Remember XHTML is all lower-case) and/or check that they are both allowed in the chosen document type, and/or use CSS instead of this attribute. If you received this error when using the <embed> element to incorporate flash media in a Web page, see the FAQ item on valid flash.

  2. Error Line 16, Column 21: there is no attribute "inkscape:version" 
       inkscape:version="0.44.1"

    ✉

    You have used the attribute named above in your document, but the document type you are using does not support that attribute for this element. This error is often caused by incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Transitional" document type to get the "target" attribute), or by using vendor proprietary extensions such as "marginheight" (this is usually fixed by using CSS to achieve the desired effect instead).

    This error may also result if the element itself is not supported in the document type you are using, as an undefined element will have no supported attributes; in this case, see the element-undefined error message for further information.

    How to fix: check the spelling and case of the element and attribute, (Remember XHTML is all lower-case) and/or check that they are both allowed in the chosen document type, and/or use CSS instead of this attribute. If you received this error when using the <embed> element to incorporate flash media in a Web page, see the FAQ item on valid flash.

  3. Error Line 17, Column 16: value of fixed attribute "version" not equal to default 
       version="1.0"

    ✉

  4. Error Line 18, Column 21: there is no attribute "sodipodi:docbase" 
       sodipodi:docbase="f:\wiki\graphics"

    ✉

    You have used the attribute named above in your document, but the document type you are using does not support that attribute for this element. This error is often caused by incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Transitional" document type to get the "target" attribute), or by using vendor proprietary extensions such as "marginheight" (this is usually fixed by using CSS to achieve the desired effect instead).

    This error may also result if the element itself is not supported in the document type you are using, as an undefined element will have no supported attributes; in this case, see the element-undefined error message for further information.

    How to fix: check the spelling and case of the element and attribute, (Remember XHTML is all lower-case) and/or check that they are both allowed in the chosen document type, and/or use CSS instead of this attribute. If you received this error when using the <embed> element to incorporate flash media in a Web page, see the FAQ item on valid flash.

  5. Error Line 19, Column 21: there is no attribute "sodipodi:docname" 
       sodipodi:docname="redbutton.svg">

    ✉

    You have used the attribute named above in your document, but the document type you are using does not support that attribute for this element. This error is often caused by incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Transitional" document type to get the "target" attribute), or by using vendor proprietary extensions such as "marginheight" (this is usually fixed by using CSS to achieve the desired effect instead).

    This error may also result if the element itself is not supported in the document type you are using, as an undefined element will have no supported attributes; in this case, see the element-undefined error message for further information.

    How to fix: check the spelling and case of the element and attribute, (Remember XHTML is all lower-case) and/or check that they are both allowed in the chosen document type, and/or use CSS instead of this attribute. If you received this error when using the <embed> element to incorporate flash media in a Web page, see the FAQ item on valid flash.

  6. Error Line 53, Column 25: there is no attribute "inkscape:collect" 
           inkscape:collect="always"

    ✉

    You have used the attribute named above in your document, but the document type you are using does not support that attribute for this element. This error is often caused by incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Transitional" document type to get the "target" attribute), or by using vendor proprietary extensions such as "marginheight" (this is usually fixed by using CSS to achieve the desired effect instead).

    This error may also result if the element itself is not supported in the document type you are using, as an undefined element will have no supported attributes; in this case, see the element-undefined error message for further information.

    How to fix: check the spelling and case of the element and attribute, (Remember XHTML is all lower-case) and/or check that they are both allowed in the chosen document type, and/or use CSS instead of this attribute. If you received this error when using the <embed> element to incorporate flash media in a Web page, see the FAQ item on valid flash.

  7. Error Line 64, Column 25: there is no attribute "inkscape:collect" 
           inkscape:collect="always"

    ✉

    You have used the attribute named above in your document, but the document type you are using does not support that attribute for this element. This error is often caused by incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Transitional" document type to get the "target" attribute), or by using vendor proprietary extensions such as "marginheight" (this is usually fixed by using CSS to achieve the desired effect instead).

    This error may also result if the element itself is not supported in the document type you are using, as an undefined element will have no supported attributes; in this case, see the element-undefined error message for further information.

    How to fix: check the spelling and case of the element and attribute, (Remember XHTML is all lower-case) and/or check that they are both allowed in the chosen document type, and/or use CSS instead of this attribute. If you received this error when using the <embed> element to incorporate flash media in a Web page, see the FAQ item on valid flash.

  8. Error Line 74, Column 9: there is no attribute "id" 
         id="base"

    ✉

    You have used the attribute named above in your document, but the document type you are using does not support that attribute for this element. This error is often caused by incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Transitional" document type to get the "target" attribute), or by using vendor proprietary extensions such as "marginheight" (this is usually fixed by using CSS to achieve the desired effect instead).

    This error may also result if the element itself is not supported in the document type you are using, as an undefined element will have no supported attributes; in this case, see the element-undefined error message for further information.

    How to fix: check the spelling and case of the element and attribute, (Remember XHTML is all lower-case) and/or check that they are both allowed in the chosen document type, and/or use CSS instead of this attribute. If you received this error when using the <embed> element to incorporate flash media in a Web page, see the FAQ item on valid flash.

  9. Error Line 75, Column 16: there is no attribute "pagecolor" 
         pagecolor="#ffffff"

    ✉

    You have used the attribute named above in your document, but the document type you are using does not support that attribute for this element. This error is often caused by incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Transitional" document type to get the "target" attribute), or by using vendor proprietary extensions such as "marginheight" (this is usually fixed by using CSS to achieve the desired effect instead).

    This error may also result if the element itself is not supported in the document type you are using, as an undefined element will have no supported attributes; in this case, see the element-undefined error message for further information.

    How to fix: check the spelling and case of the element and attribute, (Remember XHTML is all lower-case) and/or check that they are both allowed in the chosen document type, and/or use CSS instead of this attribute. If you received this error when using the <embed> element to incorporate flash media in a Web page, see the FAQ item on valid flash.

  10. Error Line 76, Column 18: there is no attribute "bordercolor" 
         bordercolor="#666666"

    ✉

    You have used the attribute named above in your document, but the document type you are using does not support that attribute for this element. This error is often caused by incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Transitional" document type to get the "target" attribute), or by using vendor proprietary extensions such as "marginheight" (this is usually fixed by using CSS to achieve the desired effect instead).

    This error may also result if the element itself is not supported in the document type you are using, as an undefined element will have no supported attributes; in this case, see the element-undefined error message for further information.

    How to fix: check the spelling and case of the element and attribute, (Remember XHTML is all lower-case) and/or check that they are both allowed in the chosen document type, and/or use CSS instead of this attribute. If you received this error when using the <embed> element to incorporate flash media in a Web page, see the FAQ item on valid flash.

  11. Error Line 77, Column 20: there is no attribute "borderopacity" 
         borderopacity="1.0"

    ✉

    You have used the attribute named above in your document, but the document type you are using does not support that attribute for this element. This error is often caused by incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Transitional" document type to get the "target" attribute), or by using vendor proprietary extensions such as "marginheight" (this is usually fixed by using CSS to achieve the desired effect instead).

    This error may also result if the element itself is not supported in the document type you are using, as an undefined element will have no supported attributes; in this case, see the element-undefined error message for further information.

    How to fix: check the spelling and case of the element and attribute, (Remember XHTML is all lower-case) and/or check that they are both allowed in the chosen document type, and/or use CSS instead of this attribute. If you received this error when using the <embed> element to incorporate flash media in a Web page, see the FAQ item on valid flash.

  12. Error Line 78, Column 20: there is no attribute "gridtolerance" 
         gridtolerance="10000"

    ✉

    You have used the attribute named above in your document, but the document type you are using does not support that attribute for this element. This error is often caused by incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Transitional" document type to get the "target" attribute), or by using vendor proprietary extensions such as "marginheight" (this is usually fixed by using CSS to achieve the desired effect instead).

    This error may also result if the element itself is not supported in the document type you are using, as an undefined element will have no supported attributes; in this case, see the element-undefined error message for further information.

    How to fix: check the spelling and case of the element and attribute, (Remember XHTML is all lower-case) and/or check that they are both allowed in the chosen document type, and/or use CSS instead of this attribute. If you received this error when using the <embed> element to incorporate flash media in a Web page, see the FAQ item on valid flash.

  13. Error Line 79, Column 21: there is no attribute "guidetolerance" 
         guidetolerance="10"

    ✉

    You have used the attribute named above in your document, but the document type you are using does not support that attribute for this element. This error is often caused by incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Transitional" document type to get the "target" attribute), or by using vendor proprietary extensions such as "marginheight" (this is usually fixed by using CSS to achieve the desired effect instead).

    This error may also result if the element itself is not supported in the document type you are using, as an undefined element will have no supported attributes; in this case, see the element-undefined error message for further information.

    How to fix: check the spelling and case of the element and attribute, (Remember XHTML is all lower-case) and/or check that they are both allowed in the chosen document type, and/or use CSS instead of this attribute. If you received this error when using the <embed> element to incorporate flash media in a Web page, see the FAQ item on valid flash.

  14. Error Line 80, Column 22: there is no attribute "objecttolerance" 
         objecttolerance="10"

    ✉

    You have used the attribute named above in your document, but the document type you are using does not support that attribute for this element. This error is often caused by incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Transitional" document type to get the "target" attribute), or by using vendor proprietary extensions such as "marginheight" (this is usually fixed by using CSS to achieve the desired effect instead).

    This error may also result if the element itself is not supported in the document type you are using, as an undefined element will have no supported attributes; in this case, see the element-undefined error message for further information.

    How to fix: check the spelling and case of the element and attribute, (Remember XHTML is all lower-case) and/or check that they are both allowed in the chosen document type, and/or use CSS instead of this attribute. If you received this error when using the <embed> element to incorporate flash media in a Web page, see the FAQ item on valid flash.

  15. Error Line 81, Column 27: there is no attribute "inkscape:pageopacity" 
         inkscape:pageopacity="0.0"

    ✉

    You have used the attribute named above in your document, but the document type you are using does not support that attribute for this element. This error is often caused by incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Transitional" document type to get the "target" attribute), or by using vendor proprietary extensions such as "marginheight" (this is usually fixed by using CSS to achieve the desired effect instead).

    This error may also result if the element itself is not supported in the document type you are using, as an undefined element will have no supported attributes; in this case, see the element-undefined error message for further information.

    How to fix: check the spelling and case of the element and attribute, (Remember XHTML is all lower-case) and/or check that they are both allowed in the chosen document type, and/or use CSS instead of this attribute. If you received this error when using the <embed> element to incorporate flash media in a Web page, see the FAQ item on valid flash.

  16. Error Line 82, Column 26: there is no attribute "inkscape:pageshadow" 
         inkscape:pageshadow="2"

    ✉

    You have used the attribute named above in your document, but the document type you are using does not support that attribute for this element. This error is often caused by incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Transitional" document type to get the "target" attribute), or by using vendor proprietary extensions such as "marginheight" (this is usually fixed by using CSS to achieve the desired effect instead).

    This error may also result if the element itself is not supported in the document type you are using, as an undefined element will have no supported attributes; in this case, see the element-undefined error message for further information.

    How to fix: check the spelling and case of the element and attribute, (Remember XHTML is all lower-case) and/or check that they are both allowed in the chosen document type, and/or use CSS instead of this attribute. If you received this error when using the <embed> element to incorporate flash media in a Web page, see the FAQ item on valid flash.

  17. Error Line 83, Column 20: there is no attribute "inkscape:zoom" 
         inkscape:zoom="1.4"

    ✉

    You have used the attribute named above in your document, but the document type you are using does not support that attribute for this element. This error is often caused by incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Transitional" document type to get the "target" attribute), or by using vendor proprietary extensions such as "marginheight" (this is usually fixed by using CSS to achieve the desired effect instead).

    This error may also result if the element itself is not supported in the document type you are using, as an undefined element will have no supported attributes; in this case, see the element-undefined error message for further information.

    How to fix: check the spelling and case of the element and attribute, (Remember XHTML is all lower-case) and/or check that they are both allowed in the chosen document type, and/or use CSS instead of this attribute. If you received this error when using the <embed> element to incorporate flash media in a Web page, see the FAQ item on valid flash.

  18. Error Line 84, Column 18: there is no attribute "inkscape:cx" 
         inkscape:cx="138.21425"

    ✉

    You have used the attribute named above in your document, but the document type you are using does not support that attribute for this element. This error is often caused by incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Transitional" document type to get the "target" attribute), or by using vendor proprietary extensions such as "marginheight" (this is usually fixed by using CSS to achieve the desired effect instead).

    This error may also result if the element itself is not supported in the document type you are using, as an undefined element will have no supported attributes; in this case, see the element-undefined error message for further information.

    How to fix: check the spelling and case of the element and attribute, (Remember XHTML is all lower-case) and/or check that they are both allowed in the chosen document type, and/or use CSS instead of this attribute. If you received this error when using the <embed> element to incorporate flash media in a Web page, see the FAQ item on valid flash.

  19. Error Line 85, Column 18: there is no attribute "inkscape:cy" 
         inkscape:cy="148.57143"

    ✉

    You have used the attribute named above in your document, but the document type you are using does not support that attribute for this element. This error is often caused by incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Transitional" document type to get the "target" attribute), or by using vendor proprietary extensions such as "marginheight" (this is usually fixed by using CSS to achieve the desired effect instead).

    This error may also result if the element itself is not supported in the document type you are using, as an undefined element will have no supported attributes; in this case, see the element-undefined error message for further information.

    How to fix: check the spelling and case of the element and attribute, (Remember XHTML is all lower-case) and/or check that they are both allowed in the chosen document type, and/or use CSS instead of this attribute. If you received this error when using the <embed> element to incorporate flash media in a Web page, see the FAQ item on valid flash.

  20. Error Line 86, Column 30: there is no attribute "inkscape:document-units" 
         inkscape:document-units="px"

    ✉

    You have used the attribute named above in your document, but the document type you are using does not support that attribute for this element. This error is often caused by incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Transitional" document type to get the "target" attribute), or by using vendor proprietary extensions such as "marginheight" (this is usually fixed by using CSS to achieve the desired effect instead).

    This error may also result if the element itself is not supported in the document type you are using, as an undefined element will have no supported attributes; in this case, see the element-undefined error message for further information.

    How to fix: check the spelling and case of the element and attribute, (Remember XHTML is all lower-case) and/or check that they are both allowed in the chosen document type, and/or use CSS instead of this attribute. If you received this error when using the <embed> element to incorporate flash media in a Web page, see the FAQ item on valid flash.

  21. Error Line 87, Column 29: there is no attribute "inkscape:current-layer" 
         inkscape:current-layer="layer1"

    ✉

    You have used the attribute named above in your document, but the document type you are using does not support that attribute for this element. This error is often caused by incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Transitional" document type to get the "target" attribute), or by using vendor proprietary extensions such as "marginheight" (this is usually fixed by using CSS to achieve the desired effect instead).

    This error may also result if the element itself is not supported in the document type you are using, as an undefined element will have no supported attributes; in this case, see the element-undefined error message for further information.

    How to fix: check the spelling and case of the element and attribute, (Remember XHTML is all lower-case) and/or check that they are both allowed in the chosen document type, and/or use CSS instead of this attribute. If you received this error when using the <embed> element to incorporate flash media in a Web page, see the FAQ item on valid flash.

  22. Error Line 88, Column 12: there is no attribute "width" 
         width="300px"

    ✉

    You have used the attribute named above in your document, but the document type you are using does not support that attribute for this element. This error is often caused by incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Transitional" document type to get the "target" attribute), or by using vendor proprietary extensions such as "marginheight" (this is usually fixed by using CSS to achieve the desired effect instead).

    This error may also result if the element itself is not supported in the document type you are using, as an undefined element will have no supported attributes; in this case, see the element-undefined error message for further information.

    How to fix: check the spelling and case of the element and attribute, (Remember XHTML is all lower-case) and/or check that they are both allowed in the chosen document type, and/or use CSS instead of this attribute. If you received this error when using the <embed> element to incorporate flash media in a Web page, see the FAQ item on valid flash.

  23. Error Line 89, Column 13: there is no attribute "height" 
         height="300px"

    ✉

    You have used the attribute named above in your document, but the document type you are using does not support that attribute for this element. This error is often caused by incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Transitional" document type to get the "target" attribute), or by using vendor proprietary extensions such as "marginheight" (this is usually fixed by using CSS to achieve the desired effect instead).

    This error may also result if the element itself is not supported in the document type you are using, as an undefined element will have no supported attributes; in this case, see the element-undefined error message for further information.

    How to fix: check the spelling and case of the element and attribute, (Remember XHTML is all lower-case) and/or check that they are both allowed in the chosen document type, and/or use CSS instead of this attribute. If you received this error when using the <embed> element to incorporate flash media in a Web page, see the FAQ item on valid flash.

  24. Error Line 90, Column 28: there is no attribute "inkscape:window-width" 
         inkscape:window-width="1024"

    ✉

    You have used the attribute named above in your document, but the document type you are using does not support that attribute for this element. This error is often caused by incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Transitional" document type to get the "target" attribute), or by using vendor proprietary extensions such as "marginheight" (this is usually fixed by using CSS to achieve the desired effect instead).

    This error may also result if the element itself is not supported in the document type you are using, as an undefined element will have no supported attributes; in this case, see the element-undefined error message for further information.

    How to fix: check the spelling and case of the element and attribute, (Remember XHTML is all lower-case) and/or check that they are both allowed in the chosen document type, and/or use CSS instead of this attribute. If you received this error when using the <embed> element to incorporate flash media in a Web page, see the FAQ item on valid flash.

  25. Error Line 91, Column 29: there is no attribute "inkscape:window-height" 
         inkscape:window-height="667"

    ✉

    You have used the attribute named above in your document, but the document type you are using does not support that attribute for this element. This error is often caused by incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Transitional" document type to get the "target" attribute), or by using vendor proprietary extensions such as "marginheight" (this is usually fixed by using CSS to achieve the desired effect instead).

    This error may also result if the element itself is not supported in the document type you are using, as an undefined element will have no supported attributes; in this case, see the element-undefined error message for further information.

    How to fix: check the spelling and case of the element and attribute, (Remember XHTML is all lower-case) and/or check that they are both allowed in the chosen document type, and/or use CSS instead of this attribute. If you received this error when using the <embed> element to incorporate flash media in a Web page, see the FAQ item on valid flash.

  26. Error Line 92, Column 24: there is no attribute "inkscape:window-x" 
         inkscape:window-x="-4"

    ✉

    You have used the attribute named above in your document, but the document type you are using does not support that attribute for this element. This error is often caused by incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Transitional" document type to get the "target" attribute), or by using vendor proprietary extensions such as "marginheight" (this is usually fixed by using CSS to achieve the desired effect instead).

    This error may also result if the element itself is not supported in the document type you are using, as an undefined element will have no supported attributes; in this case, see the element-undefined error message for further information.

    How to fix: check the spelling and case of the element and attribute, (Remember XHTML is all lower-case) and/or check that they are both allowed in the chosen document type, and/or use CSS instead of this attribute. If you received this error when using the <embed> element to incorporate flash media in a Web page, see the FAQ item on valid flash.

  27. Error Line 93, Column 24: there is no attribute "inkscape:window-y" 
         inkscape:window-y="26" />

    ✉

    You have used the attribute named above in your document, but the document type you are using does not support that attribute for this element. This error is often caused by incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Transitional" document type to get the "target" attribute), or by using vendor proprietary extensions such as "marginheight" (this is usually fixed by using CSS to achieve the desired effect instead).

    This error may also result if the element itself is not supported in the document type you are using, as an undefined element will have no supported attributes; in this case, see the element-undefined error message for further information.

    How to fix: check the spelling and case of the element and attribute, (Remember XHTML is all lower-case) and/or check that they are both allowed in the chosen document type, and/or use CSS instead of this attribute. If you received this error when using the <embed> element to incorporate flash media in a Web page, see the FAQ item on valid flash.

  28. Error Line 93, Column 30: element "sodipodi:namedview" undefined 
         inkscape:window-y="26" />

    ✉

    You have used the element named above in your document, but the document type you are using does not define an element of that name. This error is often caused by:

    • incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Frameset" document type to get the "<frameset>" element),
    • by using vendor proprietary extensions such as "<spacer>" or "<marquee>" (this is usually fixed by using CSS to achieve the desired effect instead).
    • by using upper-case tags in XHTML (in XHTML attributes and elements must be all lower-case).
  29. Error Line 96, Column 13: element "rdf:RDF" undefined 
        <rdf:RDF>

    ✉

    You have used the element named above in your document, but the document type you are using does not define an element of that name. This error is often caused by:

    • incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Frameset" document type to get the "<frameset>" element),
    • by using vendor proprietary extensions such as "<spacer>" or "<marquee>" (this is usually fixed by using CSS to achieve the desired effect instead).
    • by using upper-case tags in XHTML (in XHTML attributes and elements must be all lower-case).
  30. Error Line 98, Column 20: there is no attribute "rdf:about" 
             rdf:about="">

    ✉

    You have used the attribute named above in your document, but the document type you are using does not support that attribute for this element. This error is often caused by incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Transitional" document type to get the "target" attribute), or by using vendor proprietary extensions such as "marginheight" (this is usually fixed by using CSS to achieve the desired effect instead).

    This error may also result if the element itself is not supported in the document type you are using, as an undefined element will have no supported attributes; in this case, see the element-undefined error message for further information.

    How to fix: check the spelling and case of the element and attribute, (Remember XHTML is all lower-case) and/or check that they are both allowed in the chosen document type, and/or use CSS instead of this attribute. If you received this error when using the <embed> element to incorporate flash media in a Web page, see the FAQ item on valid flash.

  31. Error Line 98, Column 22: element "cc:Work" undefined 
             rdf:about="">

    ✉

    You have used the element named above in your document, but the document type you are using does not define an element of that name. This error is often caused by:

    • incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Frameset" document type to get the "<frameset>" element),
    • by using vendor proprietary extensions such as "<spacer>" or "<marquee>" (this is usually fixed by using CSS to achieve the desired effect instead).
    • by using upper-case tags in XHTML (in XHTML attributes and elements must be all lower-case).
  32. Error Line 99, Column 19: element "dc:format" undefined 
            <dc:format>image/svg+xml</dc:format>

    ✉

    You have used the element named above in your document, but the document type you are using does not define an element of that name. This error is often caused by:

    • incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Frameset" document type to get the "<frameset>" element),
    • by using vendor proprietary extensions such as "<spacer>" or "<marquee>" (this is usually fixed by using CSS to achieve the desired effect instead).
    • by using upper-case tags in XHTML (in XHTML attributes and elements must be all lower-case).
  33. Error Line 101, Column 25: there is no attribute "rdf:resource" 
               rdf:resource="http://purl.org/dc/dcmitype/StillImage" />

    ✉

    You have used the attribute named above in your document, but the document type you are using does not support that attribute for this element. This error is often caused by incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Transitional" document type to get the "target" attribute), or by using vendor proprietary extensions such as "marginheight" (this is usually fixed by using CSS to achieve the desired effect instead).

    This error may also result if the element itself is not supported in the document type you are using, as an undefined element will have no supported attributes; in this case, see the element-undefined error message for further information.

    How to fix: check the spelling and case of the element and attribute, (Remember XHTML is all lower-case) and/or check that they are both allowed in the chosen document type, and/or use CSS instead of this attribute. If you received this error when using the <embed> element to incorporate flash media in a Web page, see the FAQ item on valid flash.

  34. Error Line 101, Column 67: element "dc:type" undefined 
               rdf:resource="http://purl.org/dc/dcmitype/StillImage" />

    ✉

    You have used the element named above in your document, but the document type you are using does not define an element of that name. This error is often caused by:

    • incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Frameset" document type to get the "<frameset>" element),
    • by using vendor proprietary extensions such as "<spacer>" or "<marquee>" (this is usually fixed by using CSS to achieve the desired effect instead).
    • by using upper-case tags in XHTML (in XHTML attributes and elements must be all lower-case).
  35. Error Line 106, Column 21: there is no attribute "inkscape:label" 
         inkscape:label="Layer 1"

    ✉

    You have used the attribute named above in your document, but the document type you are using does not support that attribute for this element. This error is often caused by incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Transitional" document type to get the "target" attribute), or by using vendor proprietary extensions such as "marginheight" (this is usually fixed by using CSS to achieve the desired effect instead).

    This error may also result if the element itself is not supported in the document type you are using, as an undefined element will have no supported attributes; in this case, see the element-undefined error message for further information.

    How to fix: check the spelling and case of the element and attribute, (Remember XHTML is all lower-case) and/or check that they are both allowed in the chosen document type, and/or use CSS instead of this attribute. If you received this error when using the <embed> element to incorporate flash media in a Web page, see the FAQ item on valid flash.

  36. Error Line 107, Column 25: there is no attribute "inkscape:groupmode" 
         inkscape:groupmode="layer"

    ✉

    You have used the attribute named above in your document, but the document type you are using does not support that attribute for this element. This error is often caused by incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Transitional" document type to get the "target" attribute), or by using vendor proprietary extensions such as "marginheight" (this is usually fixed by using CSS to achieve the desired effect instead).

    This error may also result if the element itself is not supported in the document type you are using, as an undefined element will have no supported attributes; in this case, see the element-undefined error message for further information.

    How to fix: check the spelling and case of the element and attribute, (Remember XHTML is all lower-case) and/or check that they are both allowed in the chosen document type, and/or use CSS instead of this attribute. If you received this error when using the <embed> element to incorporate flash media in a Web page, see the FAQ item on valid flash.

  37. Error Line 111, Column 22: there is no attribute "sodipodi:type" 
           sodipodi:type="arc"

    ✉

    You have used the attribute named above in your document, but the document type you are using does not support that attribute for this element. This error is often caused by incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Transitional" document type to get the "target" attribute), or by using vendor proprietary extensions such as "marginheight" (this is usually fixed by using CSS to achieve the desired effect instead).

    This error may also result if the element itself is not supported in the document type you are using, as an undefined element will have no supported attributes; in this case, see the element-undefined error message for further information.

    How to fix: check the spelling and case of the element and attribute, (Remember XHTML is all lower-case) and/or check that they are both allowed in the chosen document type, and/or use CSS instead of this attribute. If you received this error when using the <embed> element to incorporate flash media in a Web page, see the FAQ item on valid flash.

  38. Error Line 114, Column 20: there is no attribute "sodipodi:cx" 
           sodipodi:cx="-100"

    ✉

    You have used the attribute named above in your document, but the document type you are using does not support that attribute for this element. This error is often caused by incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Transitional" document type to get the "target" attribute), or by using vendor proprietary extensions such as "marginheight" (this is usually fixed by using CSS to achieve the desired effect instead).

    This error may also result if the element itself is not supported in the document type you are using, as an undefined element will have no supported attributes; in this case, see the element-undefined error message for further information.

    How to fix: check the spelling and case of the element and attribute, (Remember XHTML is all lower-case) and/or check that they are both allowed in the chosen document type, and/or use CSS instead of this attribute. If you received this error when using the <embed> element to incorporate flash media in a Web page, see the FAQ item on valid flash.

  39. Error Line 115, Column 20: there is no attribute "sodipodi:cy" 
           sodipodi:cy="-394.28571"

    ✉

    You have used the attribute named above in your document, but the document type you are using does not support that attribute for this element. This error is often caused by incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Transitional" document type to get the "target" attribute), or by using vendor proprietary extensions such as "marginheight" (this is usually fixed by using CSS to achieve the desired effect instead).

    This error may also result if the element itself is not supported in the document type you are using, as an undefined element will have no supported attributes; in this case, see the element-undefined error message for further information.

    How to fix: check the spelling and case of the element and attribute, (Remember XHTML is all lower-case) and/or check that they are both allowed in the chosen document type, and/or use CSS instead of this attribute. If you received this error when using the <embed> element to incorporate flash media in a Web page, see the FAQ item on valid flash.

  40. Error Line 116, Column 20: there is no attribute "sodipodi:rx" 
           sodipodi:rx="154.28572"

    ✉

    You have used the attribute named above in your document, but the document type you are using does not support that attribute for this element. This error is often caused by incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Transitional" document type to get the "target" attribute), or by using vendor proprietary extensions such as "marginheight" (this is usually fixed by using CSS to achieve the desired effect instead).

    This error may also result if the element itself is not supported in the document type you are using, as an undefined element will have no supported attributes; in this case, see the element-undefined error message for further information.

    How to fix: check the spelling and case of the element and attribute, (Remember XHTML is all lower-case) and/or check that they are both allowed in the chosen document type, and/or use CSS instead of this attribute. If you received this error when using the <embed> element to incorporate flash media in a Web page, see the FAQ item on valid flash.

  41. Error Line 117, Column 20: there is no attribute "sodipodi:ry" 
           sodipodi:ry="154.28572"

    ✉

    You have used the attribute named above in your document, but the document type you are using does not support that attribute for this element. This error is often caused by incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Transitional" document type to get the "target" attribute), or by using vendor proprietary extensions such as "marginheight" (this is usually fixed by using CSS to achieve the desired effect instead).

    This error may also result if the element itself is not supported in the document type you are using, as an undefined element will have no supported attributes; in this case, see the element-undefined error message for further information.

    How to fix: check the spelling and case of the element and attribute, (Remember XHTML is all lower-case) and/or check that they are both allowed in the chosen document type, and/or use CSS instead of this attribute. If you received this error when using the <embed> element to incorporate flash media in a Web page, see the FAQ item on valid flash.

  42. Error Line 125, Column 27: there is no attribute "sodipodi:nodetypes" 
           sodipodi:nodetypes="ccssscc" />

    ✉

    You have used the attribute named above in your document, but the document type you are using does not support that attribute for this element. This error is often caused by incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Transitional" document type to get the "target" attribute), or by using vendor proprietary extensions such as "marginheight" (this is usually fixed by using CSS to achieve the desired effect instead).

    This error may also result if the element itself is not supported in the document type you are using, as an undefined element will have no supported attributes; in this case, see the element-undefined error message for further information.

    How to fix: check the spelling and case of the element and attribute, (Remember XHTML is all lower-case) and/or check that they are both allowed in the chosen document type, and/or use CSS instead of this attribute. If you received this error when using the <embed> element to incorporate flash media in a Web page, see the FAQ item on valid flash.

↑ Top

Source Listing

Below is the source input I used for this validation:

  1. <?xml version="1.0" encoding="UTF-8" standalone="no"?>
  2. <!-- Created with Inkscape (http://www.inkscape.org/) -->
  3. <!DOCTYPE svg PUBLIC "-//W3C//DTD SVG 1.1//EN" "http://www.w3.org/Graphics/SVG/1.1/DTD/svg11.dtd"><svg
  4. xmlns:dc="http://purl.org/dc/elements/1.1/"
  5. xmlns:cc="http://web.resource.org/cc/"
  6. xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#"
  7. xmlns:svg="http://www.w3.org/2000/svg"
  8. xmlns="http://www.w3.org/2000/svg"
  9. xmlns:xlink="http://www.w3.org/1999/xlink"
  10. xmlns:sodipodi="http://sodipodi.sourceforge.net/DTD/sodipodi-0.dtd"
  11. xmlns:inkscape="http://www.inkscape.org/namespaces/inkscape"
  12. width="299.99991"
  13. height="299.99991"
  14. id="svg2"
  15. sodipodi:version="0.32"
  16. inkscape:version="0.44.1"
  17. version="1.0"
  18. sodipodi:docbase="f:\wiki\graphics"
  19. sodipodi:docname="redbutton.svg">
  20. <defs
  21. id="defs4">
  22. <linearGradient
  23. id="linearGradient2782">
  24. <stop
  25. id="stop2788"
  26. offset="0"
  27. style="stop-color:white;stop-opacity:0;" />
  28. <stop
  29. id="stop2790"
  30. offset="1"
  31. style="stop-color:white;stop-opacity:1;" />
  32. </linearGradient>
  33. <linearGradient
  34. id="linearGradient2760">
  35. <stop
  36. style="stop-color:#fbcaca;stop-opacity:1;"
  37. offset="0"
  38. id="stop2762" />
  39. <stop
  40. id="stop2770"
  41. offset="0.35964912"
  42. style="stop-color:#f78e8e;stop-opacity:1;" />
  43. <stop
  44. style="stop-color:#f57070;stop-opacity:1;"
  45. offset="0.79216683"
  46. id="stop2772" />
  47. <stop
  48. style="stop-color:#f54d4d;stop-opacity:1;"
  49. offset="1"
  50. id="stop2764" />
  51. </linearGradient>
  52. <radialGradient
  53. inkscape:collect="always"
  54. xlink:href="#linearGradient2760"
  55. id="radialGradient2768"
  56. cx="-100"
  57. cy="-278.33899"
  58. fx="-100"
  59. fy="-278.33899"
  60. r="155.28572"
  61. gradientUnits="userSpaceOnUse"
  62. gradientTransform="matrix(1.266666,0,0,1.733336,26.6667,204.1162)" />
  63. <linearGradient
  64. inkscape:collect="always"
  65. xlink:href="#linearGradient2782"
  66. id="linearGradient4577"
  67. x1="191.45982"
  68. y1="155.84966"
  69. x2="147.98438"
  70. y2="10"
  71. gradientUnits="userSpaceOnUse" />
  72. </defs>
  73. <sodipodi:namedview
  74. id="base"
  75. pagecolor="#ffffff"
  76. bordercolor="#666666"
  77. borderopacity="1.0"
  78. gridtolerance="10000"
  79. guidetolerance="10"
  80. objecttolerance="10"
  81. inkscape:pageopacity="0.0"
  82. inkscape:pageshadow="2"
  83. inkscape:zoom="1.4"
  84. inkscape:cx="138.21425"
  85. inkscape:cy="148.57143"
  86. inkscape:document-units="px"
  87. inkscape:current-layer="layer1"
  88. width="300px"
  89. height="300px"
  90. inkscape:window-width="1024"
  91. inkscape:window-height="667"
  92. inkscape:window-x="-4"
  93. inkscape:window-y="26" />
  94. <metadata
  95. id="metadata7">
  96. <rdf:RDF>
  97. <cc:Work
  98. rdf:about="">
  99. <dc:format>image/svg+xml</dc:format>
  100. <dc:type
  101. rdf:resource="http://purl.org/dc/dcmitype/StillImage" />
  102. </cc:Work>
  103. </rdf:RDF>
  104. </metadata>
  105. <g
  106. inkscape:label="Layer 1"
  107. inkscape:groupmode="layer"
  108. id="layer1"
  109. transform="translate(255.2856,538.9997)">
  110. <path
  111. sodipodi:type="arc"
  112. style="opacity:1;fill:url(#radialGradient2768);fill-opacity:1;stroke:#b01e1e;stroke-width:4.14135456;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
  113. id="path1872"
  114. sodipodi:cx="-100"
  115. sodipodi:cy="-394.28571"
  116. sodipodi:rx="154.28572"
  117. sodipodi:ry="154.28572"
  118. d="M 54.285721 -394.28571 A 154.28572 154.28572 0 1 1 -254.28572,-394.28571 A 154.28572 154.28572 0 1 1 54.285721 -394.28571 z"
  119. transform="matrix(0.949753,0,0,0.949753,-10.31027,-14.52566)" />
  120. <path
  121. style="opacity:1;fill:url(#linearGradient4577);fill-opacity:1.0;stroke:none;stroke-width:4.14135456;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
  122. d="M 150,10 C 73.677722,10 11.559193,71.166428 10.03125,147.125 C 48.624417,181.81242 87.062309,183.29266 106.43304,174.29911 C 126.43304,165.01338 142.12947,135.71429 167.84375,129.28572 C 193.55803,122.85715 207.84822,124.28571 249.27679,140.71429 C 271.55223,149.54765 269.14726,118.59045 285.9375,116.46875 C 270.89584,55.370801 215.71909,9.9999999 150,10 z "
  123. transform="translate(-255.2856,-538.9997)"
  124. id="path2796"
  125. sodipodi:nodetypes="ccssscc" />
  126. </g>
  127. </svg>

↑ Top