The following notes and warnings highlight missing or conflicting information which caused the validator to perform some guesswork prior to validation, or other things affecting the output below. If the guess or fallback is incorrect, it could make validation results entirely incoherent. It is highly recommended to check these potential issues, and, if necessary, fix them and re-validate the document.
Character Encoding Override in effect!
The detected character encoding
"utf-8"
has been suppressed and
"iso-8859-1" used instead.
DOCTYPE Override in effect!
The detected DOCTYPE Declaration
"<!DOCTYPE html>" has been
suppressed and the DOCTYPE for
"HTML 4.01 Transitional" inserted instead,
but even if no errors are shown below the document will not be Valid
until you update it to reflect this new DOCTYPE.
<meta http-equiv="Content-Type" content="text/html; charset=UTF-8" />
For the current document, the validator interprets strings like
<FOO /> according to legacy rules that
break the expectations of most authors and thus cause confusing warnings
and error messages from the validator. This interpretation is triggered
by HTML 4 documents or other SGML-based HTML documents. To avoid the
messages, simply remove the "/" character in such contexts. NB: If you
expect <FOO /> to be interpreted as an
XML-compatible "self-closing" tag, then you need to use XHTML or HTML5.
This warning and related errors may also be caused by an unquoted
attribute value containing one or more "/". Example:
<a href=http://w3c.org>W3C</a>.
In such cases, the solution is to put quotation marks around the value.
<meta http-equiv="Content-Type" content="text/html; charset=UTF-8" />
You have used character data somewhere it is not permitted to appear. Mistakes that can cause this error include:
<meta http-equiv="Content-language" content="de-DE" />
For the current document, the validator interprets strings like
<FOO /> according to legacy rules that
break the expectations of most authors and thus cause confusing warnings
and error messages from the validator. This interpretation is triggered
by HTML 4 documents or other SGML-based HTML documents. To avoid the
messages, simply remove the "/" character in such contexts. NB: If you
expect <FOO /> to be interpreted as an
XML-compatible "self-closing" tag, then you need to use XHTML or HTML5.
This warning and related errors may also be caused by an unquoted
attribute value containing one or more "/". Example:
<a href=http://w3c.org>W3C</a>.
In such cases, the solution is to put quotation marks around the value.
<link rel="profile" href="http://gmpg.org/xfn/11" />
For the current document, the validator interprets strings like
<FOO /> according to legacy rules that
break the expectations of most authors and thus cause confusing warnings
and error messages from the validator. This interpretation is triggered
by HTML 4 documents or other SGML-based HTML documents. To avoid the
messages, simply remove the "/" character in such contexts. NB: If you
expect <FOO /> to be interpreted as an
XML-compatible "self-closing" tag, then you need to use XHTML or HTML5.
This warning and related errors may also be caused by an unquoted
attribute value containing one or more "/". Example:
<a href=http://w3c.org>W3C</a>.
In such cases, the solution is to put quotation marks around the value.
<link rel="profile" href="http://gmpg.org/xfn/11" />
The element named above was found in a context where it is not allowed. This could mean that you have incorrectly nested elements -- such as a "style" element in the "body" section instead of inside "head" -- or two elements that overlap (which is not allowed).
One common cause for this error is the use of XHTML syntax in HTML documents. Due to HTML's rules of implicitly closed elements, this error can create cascading effects. For instance, using XHTML's "self-closing" tags for "meta" and "link" in the "head" section of a HTML document may cause the parser to infer the end of the "head" section and the beginning of the "body" section (where "link" and "meta" are not allowed; hence the reported error).
…ngster-see.de/wp-content/themes/sight/images/favico.ico" type="image/x-icon" />
For the current document, the validator interprets strings like
<FOO /> according to legacy rules that
break the expectations of most authors and thus cause confusing warnings
and error messages from the validator. This interpretation is triggered
by HTML 4 documents or other SGML-based HTML documents. To avoid the
messages, simply remove the "/" character in such contexts. NB: If you
expect <FOO /> to be interpreted as an
XML-compatible "self-closing" tag, then you need to use XHTML or HTML5.
This warning and related errors may also be caused by an unquoted
attribute value containing one or more "/". Example:
<a href=http://w3c.org>W3C</a>.
In such cases, the solution is to put quotation marks around the value.
…ngster-see.de/wp-content/themes/sight/images/favico.ico" type="image/x-icon" />
The element named above was found in a context where it is not allowed. This could mean that you have incorrectly nested elements -- such as a "style" element in the "body" section instead of inside "head" -- or two elements that overlap (which is not allowed).
One common cause for this error is the use of XHTML syntax in HTML documents. Due to HTML's rules of implicitly closed elements, this error can create cascading effects. For instance, using XHTML's "self-closing" tags for "meta" and "link" in the "head" section of a HTML document may cause the parser to infer the end of the "head" section and the beginning of the "body" section (where "link" and "meta" are not allowed; hence the reported error).
<link rel='dns-prefetch' href='//s.w.org' />
For the current document, the validator interprets strings like
<FOO /> according to legacy rules that
break the expectations of most authors and thus cause confusing warnings
and error messages from the validator. This interpretation is triggered
by HTML 4 documents or other SGML-based HTML documents. To avoid the
messages, simply remove the "/" character in such contexts. NB: If you
expect <FOO /> to be interpreted as an
XML-compatible "self-closing" tag, then you need to use XHTML or HTML5.
This warning and related errors may also be caused by an unquoted
attribute value containing one or more "/". Example:
<a href=http://w3c.org>W3C</a>.
In such cases, the solution is to put quotation marks around the value.
<link rel='dns-prefetch' href='//s.w.org' />
The element named above was found in a context where it is not allowed. This could mean that you have incorrectly nested elements -- such as a "style" element in the "body" section instead of inside "head" -- or two elements that overlap (which is not allowed).
One common cause for this error is the use of XHTML syntax in HTML documents. Due to HTML's rules of implicitly closed elements, this error can create cascading effects. For instance, using XHTML's "self-closing" tags for "meta" and "link" in the "head" section of a HTML document may cause the parser to infer the end of the "head" section and the beginning of the "body" section (where "link" and "meta" are not allowed; hence the reported error).
…rein Wollingster See e.V. » Feed" href="http://www.wollingster-see.de" />
For the current document, the validator interprets strings like
<FOO /> according to legacy rules that
break the expectations of most authors and thus cause confusing warnings
and error messages from the validator. This interpretation is triggered
by HTML 4 documents or other SGML-based HTML documents. To avoid the
messages, simply remove the "/" character in such contexts. NB: If you
expect <FOO /> to be interpreted as an
XML-compatible "self-closing" tag, then you need to use XHTML or HTML5.
This warning and related errors may also be caused by an unquoted
attribute value containing one or more "/". Example:
<a href=http://w3c.org>W3C</a>.
In such cases, the solution is to put quotation marks around the value.
…rein Wollingster See e.V. » Feed" href="http://www.wollingster-see.de" />
The element named above was found in a context where it is not allowed. This could mean that you have incorrectly nested elements -- such as a "style" element in the "body" section instead of inside "head" -- or two elements that overlap (which is not allowed).
One common cause for this error is the use of XHTML syntax in HTML documents. Due to HTML's rules of implicitly closed elements, this error can create cascading effects. For instance, using XHTML's "self-closing" tags for "meta" and "link" in the "head" section of a HTML document may cause the parser to infer the end of the "head" section and the beginning of the "body" section (where "link" and "meta" are not allowed; hence the reported error).
…uo; Kommentar-Feed" href="http://www.wollingster-see.de/?feed=comments-rss2" />
For the current document, the validator interprets strings like
<FOO /> according to legacy rules that
break the expectations of most authors and thus cause confusing warnings
and error messages from the validator. This interpretation is triggered
by HTML 4 documents or other SGML-based HTML documents. To avoid the
messages, simply remove the "/" character in such contexts. NB: If you
expect <FOO /> to be interpreted as an
XML-compatible "self-closing" tag, then you need to use XHTML or HTML5.
This warning and related errors may also be caused by an unquoted
attribute value containing one or more "/". Example:
<a href=http://w3c.org>W3C</a>.
In such cases, the solution is to put quotation marks around the value.
…uo; Kommentar-Feed" href="http://www.wollingster-see.de/?feed=comments-rss2" />
The element named above was found in a context where it is not allowed. This could mean that you have incorrectly nested elements -- such as a "style" element in the "body" section instead of inside "head" -- or two elements that overlap (which is not allowed).
One common cause for this error is the use of XHTML syntax in HTML documents. Due to HTML's rules of implicitly closed elements, this error can create cascading effects. For instance, using XHTML's "self-closing" tags for "meta" and "link" in the "head" section of a HTML document may cause the parser to infer the end of the "head" section and the beginning of the "body" section (where "link" and "meta" are not allowed; hence the reported error).
<style type="text/css">
The element named above was found in a context where it is not allowed. This could mean that you have incorrectly nested elements -- such as a "style" element in the "body" section instead of inside "head" -- or two elements that overlap (which is not allowed).
One common cause for this error is the use of XHTML syntax in HTML documents. Due to HTML's rules of implicitly closed elements, this error can create cascading effects. For instance, using XHTML's "self-closing" tags for "meta" and "link" in the "head" section of a HTML document may cause the parser to infer the end of the "head" section and the beginning of the "body" section (where "link" and "meta" are not allowed; hence the reported error).
…css/dist/block-library/style.min.css?ver=5.5.13' type='text/css' media='all' />
For the current document, the validator interprets strings like
<FOO /> according to legacy rules that
break the expectations of most authors and thus cause confusing warnings
and error messages from the validator. This interpretation is triggered
by HTML 4 documents or other SGML-based HTML documents. To avoid the
messages, simply remove the "/" character in such contexts. NB: If you
expect <FOO /> to be interpreted as an
XML-compatible "self-closing" tag, then you need to use XHTML or HTML5.
This warning and related errors may also be caused by an unquoted
attribute value containing one or more "/". Example:
<a href=http://w3c.org>W3C</a>.
In such cases, the solution is to put quotation marks around the value.
…css/dist/block-library/style.min.css?ver=5.5.13' type='text/css' media='all' />
The element named above was found in a context where it is not allowed. This could mean that you have incorrectly nested elements -- such as a "style" element in the "body" section instead of inside "head" -- or two elements that overlap (which is not allowed).
One common cause for this error is the use of XHTML syntax in HTML documents. Due to HTML's rules of implicitly closed elements, this error can create cascading effects. For instance, using XHTML's "self-closing" tags for "meta" and "link" in the "head" section of a HTML document may cause the parser to infer the end of the "head" section and the beginning of the "body" section (where "link" and "meta" are not allowed; hence the reported error).
…de/wp-content/themes/sight/style.css?ver=5.5.13' type='text/css' media='all' />
For the current document, the validator interprets strings like
<FOO /> according to legacy rules that
break the expectations of most authors and thus cause confusing warnings
and error messages from the validator. This interpretation is triggered
by HTML 4 documents or other SGML-based HTML documents. To avoid the
messages, simply remove the "/" character in such contexts. NB: If you
expect <FOO /> to be interpreted as an
XML-compatible "self-closing" tag, then you need to use XHTML or HTML5.
This warning and related errors may also be caused by an unquoted
attribute value containing one or more "/". Example:
<a href=http://w3c.org>W3C</a>.
In such cases, the solution is to put quotation marks around the value.
…de/wp-content/themes/sight/style.css?ver=5.5.13' type='text/css' media='all' />
The element named above was found in a context where it is not allowed. This could mean that you have incorrectly nested elements -- such as a "style" element in the "body" section instead of inside "head" -- or two elements that overlap (which is not allowed).
One common cause for this error is the use of XHTML syntax in HTML documents. Due to HTML's rules of implicitly closed elements, this error can create cascading effects. For instance, using XHTML's "self-closing" tags for "meta" and "link" in the "head" section of a HTML document may cause the parser to infer the end of the "head" section and the beginning of the "body" section (where "link" and "meta" are not allowed; hence the reported error).
…cybox/css/jquery.fancybox.min.css?ver=1.3.24' type='text/css' media='screen' />
For the current document, the validator interprets strings like
<FOO /> according to legacy rules that
break the expectations of most authors and thus cause confusing warnings
and error messages from the validator. This interpretation is triggered
by HTML 4 documents or other SGML-based HTML documents. To avoid the
messages, simply remove the "/" character in such contexts. NB: If you
expect <FOO /> to be interpreted as an
XML-compatible "self-closing" tag, then you need to use XHTML or HTML5.
This warning and related errors may also be caused by an unquoted
attribute value containing one or more "/". Example:
<a href=http://w3c.org>W3C</a>.
In such cases, the solution is to put quotation marks around the value.
…cybox/css/jquery.fancybox.min.css?ver=1.3.24' type='text/css' media='screen' />
The element named above was found in a context where it is not allowed. This could mean that you have incorrectly nested elements -- such as a "style" element in the "body" section instead of inside "head" -- or two elements that overlap (which is not allowed).
One common cause for this error is the use of XHTML syntax in HTML documents. Due to HTML's rules of implicitly closed elements, this error can create cascading effects. For instance, using XHTML's "self-closing" tags for "meta" and "link" in the "head" section of a HTML document may cause the parser to infer the end of the "head" section and the beginning of the "body" section (where "link" and "meta" are not allowed; hence the reported error).
<style id='fancybox-inline-css' type='text/css'>
You have used the attribute named above in your document, but the document type you are using does not support that attribute for this element. This error is often caused by incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Transitional" document type to get the "target" attribute), or by using vendor proprietary extensions such as "marginheight" (this is usually fixed by using CSS to achieve the desired effect instead).
This error may also result if the element itself is not supported in the document type you are using, as an undefined element will have no supported attributes; in this case, see the element-undefined error message for further information.
How to fix: check the spelling and case of the element and attribute, (Remember XHTML is all lower-case) and/or check that they are both allowed in the chosen document type, and/or use CSS instead of this attribute. If you received this error when using the <embed> element to incorporate flash media in a Web page, see the FAQ item on valid flash.
<style id='fancybox-inline-css' type='text/css'>
The element named above was found in a context where it is not allowed. This could mean that you have incorrectly nested elements -- such as a "style" element in the "body" section instead of inside "head" -- or two elements that overlap (which is not allowed).
One common cause for this error is the use of XHTML syntax in HTML documents. Due to HTML's rules of implicitly closed elements, this error can create cascading effects. For instance, using XHTML's "self-closing" tags for "meta" and "link" in the "head" section of a HTML document may cause the parser to infer the end of the "head" section and the beginning of the "body" section (where "link" and "meta" are not allowed; hence the reported error).
…de/wp-includes/js/jquery/jquery.js?ver=1.12.4-wp' id='jquery-core-js'></script>
You have used the attribute named above in your document, but the document type you are using does not support that attribute for this element. This error is often caused by incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Transitional" document type to get the "target" attribute), or by using vendor proprietary extensions such as "marginheight" (this is usually fixed by using CSS to achieve the desired effect instead).
This error may also result if the element itself is not supported in the document type you are using, as an undefined element will have no supported attributes; in this case, see the element-undefined error message for further information.
How to fix: check the spelling and case of the element and attribute, (Remember XHTML is all lower-case) and/or check that they are both allowed in the chosen document type, and/or use CSS instead of this attribute. If you received this error when using the <embed> element to incorporate flash media in a Web page, see the FAQ item on valid flash.
…ngster-see.de/index.php?rest_route=/" /><link rel="EditURI" type="application/…
For the current document, the validator interprets strings like
<FOO /> according to legacy rules that
break the expectations of most authors and thus cause confusing warnings
and error messages from the validator. This interpretation is triggered
by HTML 4 documents or other SGML-based HTML documents. To avoid the
messages, simply remove the "/" character in such contexts. NB: If you
expect <FOO /> to be interpreted as an
XML-compatible "self-closing" tag, then you need to use XHTML or HTML5.
This warning and related errors may also be caused by an unquoted
attribute value containing one or more "/". Example:
<a href=http://w3c.org>W3C</a>.
In such cases, the solution is to put quotation marks around the value.
…ngster-see.de/index.php?rest_route=/" /><link rel="EditURI" type="application/…
The element named above was found in a context where it is not allowed. This could mean that you have incorrectly nested elements -- such as a "style" element in the "body" section instead of inside "head" -- or two elements that overlap (which is not allowed).
One common cause for this error is the use of XHTML syntax in HTML documents. Due to HTML's rules of implicitly closed elements, this error can create cascading effects. For instance, using XHTML's "self-closing" tags for "meta" and "link" in the "head" section of a HTML document may cause the parser to infer the end of the "head" section and the beginning of the "body" section (where "link" and "meta" are not allowed; hence the reported error).
…ion/rsd+xml" title="RSD" href="http://www.wollingster-see.de/xmlrpc.php?rsd" />
For the current document, the validator interprets strings like
<FOO /> according to legacy rules that
break the expectations of most authors and thus cause confusing warnings
and error messages from the validator. This interpretation is triggered
by HTML 4 documents or other SGML-based HTML documents. To avoid the
messages, simply remove the "/" character in such contexts. NB: If you
expect <FOO /> to be interpreted as an
XML-compatible "self-closing" tag, then you need to use XHTML or HTML5.
This warning and related errors may also be caused by an unquoted
attribute value containing one or more "/". Example:
<a href=http://w3c.org>W3C</a>.
In such cases, the solution is to put quotation marks around the value.
…ion/rsd+xml" title="RSD" href="http://www.wollingster-see.de/xmlrpc.php?rsd" />
The element named above was found in a context where it is not allowed. This could mean that you have incorrectly nested elements -- such as a "style" element in the "body" section instead of inside "head" -- or two elements that overlap (which is not allowed).
One common cause for this error is the use of XHTML syntax in HTML documents. Due to HTML's rules of implicitly closed elements, this error can create cascading effects. For instance, using XHTML's "self-closing" tags for "meta" and "link" in the "head" section of a HTML document may cause the parser to infer the end of the "head" section and the beginning of the "body" section (where "link" and "meta" are not allowed; hence the reported error).
…ifest+xml" href="http://www.wollingster-see.de/wp-includes/wlwmanifest.xml" />
For the current document, the validator interprets strings like
<FOO /> according to legacy rules that
break the expectations of most authors and thus cause confusing warnings
and error messages from the validator. This interpretation is triggered
by HTML 4 documents or other SGML-based HTML documents. To avoid the
messages, simply remove the "/" character in such contexts. NB: If you
expect <FOO /> to be interpreted as an
XML-compatible "self-closing" tag, then you need to use XHTML or HTML5.
This warning and related errors may also be caused by an unquoted
attribute value containing one or more "/". Example:
<a href=http://w3c.org>W3C</a>.
In such cases, the solution is to put quotation marks around the value.
…ifest+xml" href="http://www.wollingster-see.de/wp-includes/wlwmanifest.xml" />
The element named above was found in a context where it is not allowed. This could mean that you have incorrectly nested elements -- such as a "style" element in the "body" section instead of inside "head" -- or two elements that overlap (which is not allowed).
One common cause for this error is the use of XHTML syntax in HTML documents. Due to HTML's rules of implicitly closed elements, this error can create cascading effects. For instance, using XHTML's "self-closing" tags for "meta" and "link" in the "head" section of a HTML document may cause the parser to infer the end of the "head" section and the beginning of the "body" section (where "link" and "meta" are not allowed; hence the reported error).
<meta name="generator" content="WordPress 5.5.13" />
For the current document, the validator interprets strings like
<FOO /> according to legacy rules that
break the expectations of most authors and thus cause confusing warnings
and error messages from the validator. This interpretation is triggered
by HTML 4 documents or other SGML-based HTML documents. To avoid the
messages, simply remove the "/" character in such contexts. NB: If you
expect <FOO /> to be interpreted as an
XML-compatible "self-closing" tag, then you need to use XHTML or HTML5.
This warning and related errors may also be caused by an unquoted
attribute value containing one or more "/". Example:
<a href=http://w3c.org>W3C</a>.
In such cases, the solution is to put quotation marks around the value.
<meta name="generator" content="WordPress 5.5.13" />
The element named above was found in a context where it is not allowed. This could mean that you have incorrectly nested elements -- such as a "style" element in the "body" section instead of inside "head" -- or two elements that overlap (which is not allowed).
One common cause for this error is the use of XHTML syntax in HTML documents. Due to HTML's rules of implicitly closed elements, this error can create cascading effects. For instance, using XHTML's "self-closing" tags for "meta" and "link" in the "head" section of a HTML document may cause the parser to infer the end of the "head" section and the beginning of the "body" section (where "link" and "meta" are not allowed; hence the reported error).
</head>
The Validator found an end tag for the above element, but that element is not currently open. This is often caused by a leftover end tag from an element that was removed during editing, or by an implicitly closed element (if you have an error related to an element being used where it is not allowed, this is almost certainly the case). In the latter case this error will disappear as soon as you fix the original problem.
If this error occurred in a script section of your document, you should probably read this FAQ entry.
<body class="home blog">
The element named above was found in a context where it is not allowed. This could mean that you have incorrectly nested elements -- such as a "style" element in the "body" section instead of inside "head" -- or two elements that overlap (which is not allowed).
One common cause for this error is the use of XHTML syntax in HTML documents. Due to HTML's rules of implicitly closed elements, this error can create cascading effects. For instance, using XHTML's "self-closing" tags for "meta" and "link" in the "head" section of a HTML document may cause the parser to infer the end of the "head" section and the beginning of the "body" section (where "link" and "meta" are not allowed; hence the reported error).
…ogo_v08_290x128-transparent.png" alt="Förderverein Wollingster See e.V."/></a>
For the current document, the validator interprets strings like
<FOO /> according to legacy rules that
break the expectations of most authors and thus cause confusing warnings
and error messages from the validator. This interpretation is triggered
by HTML 4 documents or other SGML-based HTML documents. To avoid the
messages, simply remove the "/" character in such contexts. NB: If you
expect <FOO /> to be interpreted as an
XML-compatible "self-closing" tag, then you need to use XHTML or HTML5.
This warning and related errors may also be caused by an unquoted
attribute value containing one or more "/". Example:
<a href=http://w3c.org>W3C</a>.
In such cases, the solution is to put quotation marks around the value.
…s.value='';" onblur="if(this.value=='') this.value='Search';" value="Search" />
For the current document, the validator interprets strings like
<FOO /> according to legacy rules that
break the expectations of most authors and thus cause confusing warnings
and error messages from the validator. This interpretation is triggered
by HTML 4 documents or other SGML-based HTML documents. To avoid the
messages, simply remove the "/" character in such contexts. NB: If you
expect <FOO /> to be interpreted as an
XML-compatible "self-closing" tag, then you need to use XHTML or HTML5.
This warning and related errors may also be caused by an unquoted
attribute value containing one or more "/". Example:
<a href=http://w3c.org>W3C</a>.
In such cases, the solution is to put quotation marks around the value.
…s.value='';" onblur="if(this.value=='') this.value='Search';" value="Search" />
</fieldset>
The next message, "start tag was here"
points to the particular instance of the tag in question); the
positional indicator points to where the validator expected you to close the
tag.
<input name="s" type="text" onfocus="if(this.value=='Search') this.value='';…
…<a href="http://www.wollingster-see.de" aria-current="page">Startseite</a></li>
You have used the attribute named above in your document, but the document type you are using does not support that attribute for this element. This error is often caused by incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Transitional" document type to get the "target" attribute), or by using vendor proprietary extensions such as "marginheight" (this is usually fixed by using CSS to achieve the desired effect instead).
This error may also result if the element itself is not supported in the document type you are using, as an undefined element will have no supported attributes; in this case, see the element-undefined error message for further information.
How to fix: check the spelling and case of the element and attribute, (Remember XHTML is all lower-case) and/or check that they are both allowed in the chosen document type, and/or use CSS instead of this attribute. If you received this error when using the <embed> element to incorporate flash media in a Web page, see the FAQ item on valid flash.
…enu-item-608"><a href="http://www.wollingster-see.de/?cat=12">Ãlteres</a></li>
You have used an illegal character in your text. HTML uses the standard UNICODE Consortium character repertoire, and it leaves undefined (among others) 65 character codes (0 to 31 inclusive and 127 to 159 inclusive) that are sometimes used for typographical quote marks and similar in proprietary character sets. The validator has found one of these undefined characters in your document. The character may appear on your browser as a curly quote, or a trademark symbol, or some other fancy glyph; on a different computer, however, it will likely appear as a completely different character, or nothing at all.
Your best bet is to replace the character with the nearest equivalent ASCII character, or to use an appropriate character entity. For more information on Character Encoding on the web, see Alan Flavell's excellent HTML Character Set Issues reference.
This error can also be triggered by formatting characters embedded in documents by some word processors. If you use a word processor to edit your HTML documents, be sure to use the "Save as ASCII" or similar command to save the document without formatting information.
…tz Wetterkapriolen geglückt" loading="lazy" title="Schilfmahd trotz Wetterkap…
You have used the attribute named above in your document, but the document type you are using does not support that attribute for this element. This error is often caused by incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Transitional" document type to get the "target" attribute), or by using vendor proprietary extensions such as "marginheight" (this is usually fixed by using CSS to achieve the desired effect instead).
This error may also result if the element itself is not supported in the document type you are using, as an undefined element will have no supported attributes; in this case, see the element-undefined error message for further information.
How to fix: check the spelling and case of the element and attribute, (Remember XHTML is all lower-case) and/or check that they are both allowed in the chosen document type, and/or use CSS instead of this attribute. If you received this error when using the <embed> element to incorporate flash media in a Web page, see the FAQ item on valid flash.
…otz Wetterkapriolen geglückt" srcset="http://www.wollingster-see.de/wp-conten…
You have used the attribute named above in your document, but the document type you are using does not support that attribute for this element. This error is often caused by incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Transitional" document type to get the "target" attribute), or by using vendor proprietary extensions such as "marginheight" (this is usually fixed by using CSS to achieve the desired effect instead).
This error may also result if the element itself is not supported in the document type you are using, as an undefined element will have no supported attributes; in this case, see the element-undefined error message for further information.
How to fix: check the spelling and case of the element and attribute, (Remember XHTML is all lower-case) and/or check that they are both allowed in the chosen document type, and/or use CSS instead of this attribute. If you received this error when using the <embed> element to incorporate flash media in a Web page, see the FAQ item on valid flash.
…01_141722-1-1024x462.jpg 1024w" sizes="(max-width: 640px) 100vw, 640px" /></a>…
You have used the attribute named above in your document, but the document type you are using does not support that attribute for this element. This error is often caused by incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Transitional" document type to get the "target" attribute), or by using vendor proprietary extensions such as "marginheight" (this is usually fixed by using CSS to achieve the desired effect instead).
This error may also result if the element itself is not supported in the document type you are using, as an undefined element will have no supported attributes; in this case, see the element-undefined error message for further information.
How to fix: check the spelling and case of the element and attribute, (Remember XHTML is all lower-case) and/or check that they are both allowed in the chosen document type, and/or use CSS instead of this attribute. If you received this error when using the <embed> element to incorporate flash media in a Web page, see the FAQ item on valid flash.
…zes="(max-width: 640px) 100vw, 640px" /></a> <div class="post-category"><a …
For the current document, the validator interprets strings like
<FOO /> according to legacy rules that
break the expectations of most authors and thus cause confusing warnings
and error messages from the validator. This interpretation is triggered
by HTML 4 documents or other SGML-based HTML documents. To avoid the
messages, simply remove the "/" character in such contexts. NB: If you
expect <FOO /> to be interpreted as an
XML-compatible "self-closing" tag, then you need to use XHTML or HTML5.
This warning and related errors may also be caused by an unquoted
attribute value containing one or more "/". Example:
<a href=http://w3c.org>W3C</a>.
In such cases, the solution is to put quotation marks around the value.
…hnucken zur Landschaftspflege am See" /></a> <div class="post-category"><a …
For the current document, the validator interprets strings like
<FOO /> according to legacy rules that
break the expectations of most authors and thus cause confusing warnings
and error messages from the validator. This interpretation is triggered
by HTML 4 documents or other SGML-based HTML documents. To avoid the
messages, simply remove the "/" character in such contexts. NB: If you
expect <FOO /> to be interpreted as an
XML-compatible "self-closing" tag, then you need to use XHTML or HTML5.
This warning and related errors may also be caused by an unquoted
attribute value containing one or more "/". Example:
<a href=http://w3c.org>W3C</a>.
In such cases, the solution is to put quotation marks around the value.
… -Förderverein stellt Infotafel auf" /></a> <div class="post-category"><a …
For the current document, the validator interprets strings like
<FOO /> according to legacy rules that
break the expectations of most authors and thus cause confusing warnings
and error messages from the validator. This interpretation is triggered
by HTML 4 documents or other SGML-based HTML documents. To avoid the
messages, simply remove the "/" character in such contexts. NB: If you
expect <FOO /> to be interpreted as an
XML-compatible "self-closing" tag, then you need to use XHTML or HTML5.
This warning and related errors may also be caused by an unquoted
attribute value containing one or more "/". Example:
<a href=http://w3c.org>W3C</a>.
In such cases, the solution is to put quotation marks around the value.
…gster-see.de/?cat=12" rel="category">Ãlteres</a> / <a href="http://www.wollin…
You have used an illegal character in your text. HTML uses the standard UNICODE Consortium character repertoire, and it leaves undefined (among others) 65 character codes (0 to 31 inclusive and 127 to 159 inclusive) that are sometimes used for typographical quote marks and similar in proprietary character sets. The validator has found one of these undefined characters in your document. The character may appear on your browser as a curly quote, or a trademark symbol, or some other fancy glyph; on a different computer, however, it will likely appear as a completely different character, or nothing at all.
Your best bet is to replace the character with the nearest equivalent ASCII character, or to use an appropriate character entity. For more information on Character Encoding on the web, see Alan Flavell's excellent HTML Character Set Issues reference.
This error can also be triggered by formatting characters embedded in documents by some word processors. If you use a word processor to edit your HTML documents, be sure to use the "Save as ASCII" or similar command to save the document without formatting information.
…schüre von Dr. Hans-Christoph Vahle" /></a> <div class="post-category"><a …
For the current document, the validator interprets strings like
<FOO /> according to legacy rules that
break the expectations of most authors and thus cause confusing warnings
and error messages from the validator. This interpretation is triggered
by HTML 4 documents or other SGML-based HTML documents. To avoid the
messages, simply remove the "/" character in such contexts. NB: If you
expect <FOO /> to be interpreted as an
XML-compatible "self-closing" tag, then you need to use XHTML or HTML5.
This warning and related errors may also be caused by an unquoted
attribute value containing one or more "/". Example:
<a href=http://w3c.org>W3C</a>.
In such cases, the solution is to put quotation marks around the value.
…gster-see.de/?cat=12" rel="category">Ãlteres</a> / <a href="http://www.wollin…
You have used an illegal character in your text. HTML uses the standard UNICODE Consortium character repertoire, and it leaves undefined (among others) 65 character codes (0 to 31 inclusive and 127 to 159 inclusive) that are sometimes used for typographical quote marks and similar in proprietary character sets. The validator has found one of these undefined characters in your document. The character may appear on your browser as a curly quote, or a trademark symbol, or some other fancy glyph; on a different computer, however, it will likely appear as a completely different character, or nothing at all.
Your best bet is to replace the character with the nearest equivalent ASCII character, or to use an appropriate character entity. For more information on Character Encoding on the web, see Alan Flavell's excellent HTML Character Set Issues reference.
This error can also be triggered by formatting characters embedded in documents by some word processors. If you use a word processor to edit your HTML documents, be sure to use the "Save as ASCII" or similar command to save the document without formatting information.
…¼tzung. Bisher wurde er bei seinen MaÃnahmen auch durch Fördergelder der EU …
You have used an illegal character in your text. HTML uses the standard UNICODE Consortium character repertoire, and it leaves undefined (among others) 65 character codes (0 to 31 inclusive and 127 to 159 inclusive) that are sometimes used for typographical quote marks and similar in proprietary character sets. The validator has found one of these undefined characters in your document. The character may appear on your browser as a curly quote, or a trademark symbol, or some other fancy glyph; on a different computer, however, it will likely appear as a completely different character, or nothing at all.
Your best bet is to replace the character with the nearest equivalent ASCII character, or to use an appropriate character entity. For more information on Character Encoding on the web, see Alan Flavell's excellent HTML Character Set Issues reference.
This error can also be triggered by formatting characters embedded in documents by some word processors. If you use a word processor to edit your HTML documents, be sure to use the "Save as ASCII" or similar command to save the document without formatting information.
…0132-scaled.jpg" class="wp-block-file__button" download>Herunterladen</a></div>
…-10_15-05-43-1280-50x50.jpg 50w" sizes="(max-width: 290px) 100vw, 290px" /></a>
For the current document, the validator interprets strings like
<FOO /> according to legacy rules that
break the expectations of most authors and thus cause confusing warnings
and error messages from the validator. This interpretation is triggered
by HTML 4 documents or other SGML-based HTML documents. To avoid the
messages, simply remove the "/" character in such contexts. NB: If you
expect <FOO /> to be interpreted as an
XML-compatible "self-closing" tag, then you need to use XHTML or HTML5.
This warning and related errors may also be caused by an unquoted
attribute value containing one or more "/". Example:
<a href=http://w3c.org>W3C</a>.
In such cases, the solution is to put quotation marks around the value.
…/uploads/IMG_1357-50x50.jpg 50w" sizes="(max-width: 290px) 100vw, 290px" /></a>
For the current document, the validator interprets strings like
<FOO /> according to legacy rules that
break the expectations of most authors and thus cause confusing warnings
and error messages from the validator. This interpretation is triggered
by HTML 4 documents or other SGML-based HTML documents. To avoid the
messages, simply remove the "/" character in such contexts. NB: If you
expect <FOO /> to be interpreted as an
XML-compatible "self-closing" tag, then you need to use XHTML or HTML5.
This warning and related errors may also be caused by an unquoted
attribute value containing one or more "/". Example:
<a href=http://w3c.org>W3C</a>.
In such cases, the solution is to put quotation marks around the value.
…gster-see.de/?cat=12" rel="category">Ãlteres</a> / <a href="http://www.wollin…
You have used an illegal character in your text. HTML uses the standard UNICODE Consortium character repertoire, and it leaves undefined (among others) 65 character codes (0 to 31 inclusive and 127 to 159 inclusive) that are sometimes used for typographical quote marks and similar in proprietary character sets. The validator has found one of these undefined characters in your document. The character may appear on your browser as a curly quote, or a trademark symbol, or some other fancy glyph; on a different computer, however, it will likely appear as a completely different character, or nothing at all.
Your best bet is to replace the character with the nearest equivalent ASCII character, or to use an appropriate character entity. For more information on Character Encoding on the web, see Alan Flavell's excellent HTML Character Set Issues reference.
This error can also be triggered by formatting characters embedded in documents by some word processors. If you use a word processor to edit your HTML documents, be sure to use the "Save as ASCII" or similar command to save the document without formatting information.
…wird im Rahmen des EU-Life-Projektes âAtlantische Sandlandschaftenâ geför…
You have used an illegal character in your text. HTML uses the standard UNICODE Consortium character repertoire, and it leaves undefined (among others) 65 character codes (0 to 31 inclusive and 127 to 159 inclusive) that are sometimes used for typographical quote marks and similar in proprietary character sets. The validator has found one of these undefined characters in your document. The character may appear on your browser as a curly quote, or a trademark symbol, or some other fancy glyph; on a different computer, however, it will likely appear as a completely different character, or nothing at all.
Your best bet is to replace the character with the nearest equivalent ASCII character, or to use an appropriate character entity. For more information on Character Encoding on the web, see Alan Flavell's excellent HTML Character Set Issues reference.
This error can also be triggered by formatting characters embedded in documents by some word processors. If you use a word processor to edit your HTML documents, be sure to use the "Save as ASCII" or similar command to save the document without formatting information.
…ird im Rahmen des EU-Life-Projektes âAtlantische Sandlandschaftenâ geförd…
You have used an illegal character in your text. HTML uses the standard UNICODE Consortium character repertoire, and it leaves undefined (among others) 65 character codes (0 to 31 inclusive and 127 to 159 inclusive) that are sometimes used for typographical quote marks and similar in proprietary character sets. The validator has found one of these undefined characters in your document. The character may appear on your browser as a curly quote, or a trademark symbol, or some other fancy glyph; on a different computer, however, it will likely appear as a completely different character, or nothing at all.
Your best bet is to replace the character with the nearest equivalent ASCII character, or to use an appropriate character entity. For more information on Character Encoding on the web, see Alan Flavell's excellent HTML Character Set Issues reference.
This error can also be triggered by formatting characters embedded in documents by some word processors. If you use a word processor to edit your HTML documents, be sure to use the "Save as ASCII" or similar command to save the document without formatting information.
…n des EU-Life-Projektes âAtlantische Sandlandschaftenâ gefördert.</a></h2>
You have used an illegal character in your text. HTML uses the standard UNICODE Consortium character repertoire, and it leaves undefined (among others) 65 character codes (0 to 31 inclusive and 127 to 159 inclusive) that are sometimes used for typographical quote marks and similar in proprietary character sets. The validator has found one of these undefined characters in your document. The character may appear on your browser as a curly quote, or a trademark symbol, or some other fancy glyph; on a different computer, however, it will likely appear as a completely different character, or nothing at all.
Your best bet is to replace the character with the nearest equivalent ASCII character, or to use an appropriate character entity. For more information on Character Encoding on the web, see Alan Flavell's excellent HTML Character Set Issues reference.
This error can also be triggered by formatting characters embedded in documents by some word processors. If you use a word processor to edit your HTML documents, be sure to use the "Save as ASCII" or similar command to save the document without formatting information.
…n des EU-Life-Projektes âAtlantische Sandlandschaftenâ gefördert.</a></h2>
You have used an illegal character in your text. HTML uses the standard UNICODE Consortium character repertoire, and it leaves undefined (among others) 65 character codes (0 to 31 inclusive and 127 to 159 inclusive) that are sometimes used for typographical quote marks and similar in proprietary character sets. The validator has found one of these undefined characters in your document. The character may appear on your browser as a curly quote, or a trademark symbol, or some other fancy glyph; on a different computer, however, it will likely appear as a completely different character, or nothing at all.
Your best bet is to replace the character with the nearest equivalent ASCII character, or to use an appropriate character entity. For more information on Character Encoding on the web, see Alan Flavell's excellent HTML Character Set Issues reference.
This error can also be triggered by formatting characters embedded in documents by some word processors. If you use a word processor to edit your HTML documents, be sure to use the "Save as ASCII" or similar command to save the document without formatting information.
…0 hat sich wieder einiges an unserem âHeideseeâ getan. Der BUND Unterweser…
You have used an illegal character in your text. HTML uses the standard UNICODE Consortium character repertoire, and it leaves undefined (among others) 65 character codes (0 to 31 inclusive and 127 to 159 inclusive) that are sometimes used for typographical quote marks and similar in proprietary character sets. The validator has found one of these undefined characters in your document. The character may appear on your browser as a curly quote, or a trademark symbol, or some other fancy glyph; on a different computer, however, it will likely appear as a completely different character, or nothing at all.
Your best bet is to replace the character with the nearest equivalent ASCII character, or to use an appropriate character entity. For more information on Character Encoding on the web, see Alan Flavell's excellent HTML Character Set Issues reference.
This error can also be triggered by formatting characters embedded in documents by some word processors. If you use a word processor to edit your HTML documents, be sure to use the "Save as ASCII" or similar command to save the document without formatting information.
… hat sich wieder einiges an unserem âHeideseeâ getan. Der BUND Unterweser …
You have used an illegal character in your text. HTML uses the standard UNICODE Consortium character repertoire, and it leaves undefined (among others) 65 character codes (0 to 31 inclusive and 127 to 159 inclusive) that are sometimes used for typographical quote marks and similar in proprietary character sets. The validator has found one of these undefined characters in your document. The character may appear on your browser as a curly quote, or a trademark symbol, or some other fancy glyph; on a different computer, however, it will likely appear as a completely different character, or nothing at all.
Your best bet is to replace the character with the nearest equivalent ASCII character, or to use an appropriate character entity. For more information on Character Encoding on the web, see Alan Flavell's excellent HTML Character Set Issues reference.
This error can also be triggered by formatting characters embedded in documents by some word processors. If you use a word processor to edit your HTML documents, be sure to use the "Save as ASCII" or similar command to save the document without formatting information.
…wieder einiges an unserem âHeideseeâ getan. Der BUND Unterweser hat Förde…
You have used an illegal character in your text. HTML uses the standard UNICODE Consortium character repertoire, and it leaves undefined (among others) 65 character codes (0 to 31 inclusive and 127 to 159 inclusive) that are sometimes used for typographical quote marks and similar in proprietary character sets. The validator has found one of these undefined characters in your document. The character may appear on your browser as a curly quote, or a trademark symbol, or some other fancy glyph; on a different computer, however, it will likely appear as a completely different character, or nothing at all.
Your best bet is to replace the character with the nearest equivalent ASCII character, or to use an appropriate character entity. For more information on Character Encoding on the web, see Alan Flavell's excellent HTML Character Set Issues reference.
This error can also be triggered by formatting characters embedded in documents by some word processors. If you use a word processor to edit your HTML documents, be sure to use the "Save as ASCII" or similar command to save the document without formatting information.
…ieder einiges an unserem âHeideseeâ getan. Der BUND Unterweser hat Förder…
You have used an illegal character in your text. HTML uses the standard UNICODE Consortium character repertoire, and it leaves undefined (among others) 65 character codes (0 to 31 inclusive and 127 to 159 inclusive) that are sometimes used for typographical quote marks and similar in proprietary character sets. The validator has found one of these undefined characters in your document. The character may appear on your browser as a curly quote, or a trademark symbol, or some other fancy glyph; on a different computer, however, it will likely appear as a completely different character, or nothing at all.
Your best bet is to replace the character with the nearest equivalent ASCII character, or to use an appropriate character entity. For more information on Character Encoding on the web, see Alan Flavell's excellent HTML Character Set Issues reference.
This error can also be triggered by formatting characters embedded in documents by some word processors. If you use a word processor to edit your HTML documents, be sure to use the "Save as ASCII" or similar command to save the document without formatting information.
…chutz (NLWKN) beantragt. Etwa 30.000 ⬠Fördermittel wurden bewilligt, nachd…
You have used an illegal character in your text. HTML uses the standard UNICODE Consortium character repertoire, and it leaves undefined (among others) 65 character codes (0 to 31 inclusive and 127 to 159 inclusive) that are sometimes used for typographical quote marks and similar in proprietary character sets. The validator has found one of these undefined characters in your document. The character may appear on your browser as a curly quote, or a trademark symbol, or some other fancy glyph; on a different computer, however, it will likely appear as a completely different character, or nothing at all.
Your best bet is to replace the character with the nearest equivalent ASCII character, or to use an appropriate character entity. For more information on Character Encoding on the web, see Alan Flavell's excellent HTML Character Set Issues reference.
This error can also be triggered by formatting characters embedded in documents by some word processors. If you use a word processor to edit your HTML documents, be sure to use the "Save as ASCII" or similar command to save the document without formatting information.
…turschutzbehörde und vielen Stellen âabgestimmtâ war (u.a. Gemeinde, unse…
You have used an illegal character in your text. HTML uses the standard UNICODE Consortium character repertoire, and it leaves undefined (among others) 65 character codes (0 to 31 inclusive and 127 to 159 inclusive) that are sometimes used for typographical quote marks and similar in proprietary character sets. The validator has found one of these undefined characters in your document. The character may appear on your browser as a curly quote, or a trademark symbol, or some other fancy glyph; on a different computer, however, it will likely appear as a completely different character, or nothing at all.
Your best bet is to replace the character with the nearest equivalent ASCII character, or to use an appropriate character entity. For more information on Character Encoding on the web, see Alan Flavell's excellent HTML Character Set Issues reference.
This error can also be triggered by formatting characters embedded in documents by some word processors. If you use a word processor to edit your HTML documents, be sure to use the "Save as ASCII" or similar command to save the document without formatting information.
…urschutzbehörde und vielen Stellen âabgestimmtâ war (u.a. Gemeinde, unser…
You have used an illegal character in your text. HTML uses the standard UNICODE Consortium character repertoire, and it leaves undefined (among others) 65 character codes (0 to 31 inclusive and 127 to 159 inclusive) that are sometimes used for typographical quote marks and similar in proprietary character sets. The validator has found one of these undefined characters in your document. The character may appear on your browser as a curly quote, or a trademark symbol, or some other fancy glyph; on a different computer, however, it will likely appear as a completely different character, or nothing at all.
Your best bet is to replace the character with the nearest equivalent ASCII character, or to use an appropriate character entity. For more information on Character Encoding on the web, see Alan Flavell's excellent HTML Character Set Issues reference.
This error can also be triggered by formatting characters embedded in documents by some word processors. If you use a word processor to edit your HTML documents, be sure to use the "Save as ASCII" or similar command to save the document without formatting information.
…¶rde und vielen Stellen âabgestimmtâ war (u.a. Gemeinde, unser Fördervere…
You have used an illegal character in your text. HTML uses the standard UNICODE Consortium character repertoire, and it leaves undefined (among others) 65 character codes (0 to 31 inclusive and 127 to 159 inclusive) that are sometimes used for typographical quote marks and similar in proprietary character sets. The validator has found one of these undefined characters in your document. The character may appear on your browser as a curly quote, or a trademark symbol, or some other fancy glyph; on a different computer, however, it will likely appear as a completely different character, or nothing at all.
Your best bet is to replace the character with the nearest equivalent ASCII character, or to use an appropriate character entity. For more information on Character Encoding on the web, see Alan Flavell's excellent HTML Character Set Issues reference.
This error can also be triggered by formatting characters embedded in documents by some word processors. If you use a word processor to edit your HTML documents, be sure to use the "Save as ASCII" or similar command to save the document without formatting information.
…rde und vielen Stellen âabgestimmtâ war (u.a. Gemeinde, unser Förderverei…
You have used an illegal character in your text. HTML uses the standard UNICODE Consortium character repertoire, and it leaves undefined (among others) 65 character codes (0 to 31 inclusive and 127 to 159 inclusive) that are sometimes used for typographical quote marks and similar in proprietary character sets. The validator has found one of these undefined characters in your document. The character may appear on your browser as a curly quote, or a trademark symbol, or some other fancy glyph; on a different computer, however, it will likely appear as a completely different character, or nothing at all.
Your best bet is to replace the character with the nearest equivalent ASCII character, or to use an appropriate character entity. For more information on Character Encoding on the web, see Alan Flavell's excellent HTML Character Set Issues reference.
This error can also be triggered by formatting characters embedded in documents by some word processors. If you use a word processor to edit your HTML documents, be sure to use the "Save as ASCII" or similar command to save the document without formatting information.
… Gemeinde, unser Förderverein). Die âBauaufsichtâ » <a hr…
You have used an illegal character in your text. HTML uses the standard UNICODE Consortium character repertoire, and it leaves undefined (among others) 65 character codes (0 to 31 inclusive and 127 to 159 inclusive) that are sometimes used for typographical quote marks and similar in proprietary character sets. The validator has found one of these undefined characters in your document. The character may appear on your browser as a curly quote, or a trademark symbol, or some other fancy glyph; on a different computer, however, it will likely appear as a completely different character, or nothing at all.
Your best bet is to replace the character with the nearest equivalent ASCII character, or to use an appropriate character entity. For more information on Character Encoding on the web, see Alan Flavell's excellent HTML Character Set Issues reference.
This error can also be triggered by formatting characters embedded in documents by some word processors. If you use a word processor to edit your HTML documents, be sure to use the "Save as ASCII" or similar command to save the document without formatting information.
…Gemeinde, unser Förderverein). Die âBauaufsichtâ » <a hre…
You have used an illegal character in your text. HTML uses the standard UNICODE Consortium character repertoire, and it leaves undefined (among others) 65 character codes (0 to 31 inclusive and 127 to 159 inclusive) that are sometimes used for typographical quote marks and similar in proprietary character sets. The validator has found one of these undefined characters in your document. The character may appear on your browser as a curly quote, or a trademark symbol, or some other fancy glyph; on a different computer, however, it will likely appear as a completely different character, or nothing at all.
Your best bet is to replace the character with the nearest equivalent ASCII character, or to use an appropriate character entity. For more information on Character Encoding on the web, see Alan Flavell's excellent HTML Character Set Issues reference.
This error can also be triggered by formatting characters embedded in documents by some word processors. If you use a word processor to edit your HTML documents, be sure to use the "Save as ASCII" or similar command to save the document without formatting information.
…er Förderverein). Die âBauaufsichtâ » <a href="http://www…
You have used an illegal character in your text. HTML uses the standard UNICODE Consortium character repertoire, and it leaves undefined (among others) 65 character codes (0 to 31 inclusive and 127 to 159 inclusive) that are sometimes used for typographical quote marks and similar in proprietary character sets. The validator has found one of these undefined characters in your document. The character may appear on your browser as a curly quote, or a trademark symbol, or some other fancy glyph; on a different computer, however, it will likely appear as a completely different character, or nothing at all.
Your best bet is to replace the character with the nearest equivalent ASCII character, or to use an appropriate character entity. For more information on Character Encoding on the web, see Alan Flavell's excellent HTML Character Set Issues reference.
This error can also be triggered by formatting characters embedded in documents by some word processors. If you use a word processor to edit your HTML documents, be sure to use the "Save as ASCII" or similar command to save the document without formatting information.
…r Förderverein). Die âBauaufsichtâ » <a href="http://www.…
You have used an illegal character in your text. HTML uses the standard UNICODE Consortium character repertoire, and it leaves undefined (among others) 65 character codes (0 to 31 inclusive and 127 to 159 inclusive) that are sometimes used for typographical quote marks and similar in proprietary character sets. The validator has found one of these undefined characters in your document. The character may appear on your browser as a curly quote, or a trademark symbol, or some other fancy glyph; on a different computer, however, it will likely appear as a completely different character, or nothing at all.
Your best bet is to replace the character with the nearest equivalent ASCII character, or to use an appropriate character entity. For more information on Character Encoding on the web, see Alan Flavell's excellent HTML Character Set Issues reference.
This error can also be triggered by formatting characters embedded in documents by some word processors. If you use a word processor to edit your HTML documents, be sure to use the "Save as ASCII" or similar command to save the document without formatting information.
…e-Sandlanschaften-50x50.jpg 50w" sizes="(max-width: 290px) 100vw, 290px" /></a>
For the current document, the validator interprets strings like
<FOO /> according to legacy rules that
break the expectations of most authors and thus cause confusing warnings
and error messages from the validator. This interpretation is triggered
by HTML 4 documents or other SGML-based HTML documents. To avoid the
messages, simply remove the "/" character in such contexts. NB: If you
expect <FOO /> to be interpreted as an
XML-compatible "self-closing" tag, then you need to use XHTML or HTML5.
This warning and related errors may also be caused by an unquoted
attribute value containing one or more "/". Example:
<a href=http://w3c.org>W3C</a>.
In such cases, the solution is to put quotation marks around the value.
… href="http://www.wollingster-see.de/?cat=12" rel="category">Ãlteres</a></div>
You have used an illegal character in your text. HTML uses the standard UNICODE Consortium character repertoire, and it leaves undefined (among others) 65 character codes (0 to 31 inclusive and 127 to 159 inclusive) that are sometimes used for typographical quote marks and similar in proprietary character sets. The validator has found one of these undefined characters in your document. The character may appear on your browser as a curly quote, or a trademark symbol, or some other fancy glyph; on a different computer, however, it will likely appear as a completely different character, or nothing at all.
Your best bet is to replace the character with the nearest equivalent ASCII character, or to use an appropriate character entity. For more information on Character Encoding on the web, see Alan Flavell's excellent HTML Character Set Issues reference.
This error can also be triggered by formatting characters embedded in documents by some word processors. If you use a word processor to edit your HTML documents, be sure to use the "Save as ASCII" or similar command to save the document without formatting information.
…ploads/Ablaufrohr-50x50.jpg 50w" sizes="(max-width: 290px) 100vw, 290px" /></a>
For the current document, the validator interprets strings like
<FOO /> according to legacy rules that
break the expectations of most authors and thus cause confusing warnings
and error messages from the validator. This interpretation is triggered
by HTML 4 documents or other SGML-based HTML documents. To avoid the
messages, simply remove the "/" character in such contexts. NB: If you
expect <FOO /> to be interpreted as an
XML-compatible "self-closing" tag, then you need to use XHTML or HTML5.
This warning and related errors may also be caused by an unquoted
attribute value containing one or more "/". Example:
<a href=http://w3c.org>W3C</a>.
In such cases, the solution is to put quotation marks around the value.
… href="http://www.wollingster-see.de/?cat=12" rel="category">Ãlteres</a></div>
You have used an illegal character in your text. HTML uses the standard UNICODE Consortium character repertoire, and it leaves undefined (among others) 65 character codes (0 to 31 inclusive and 127 to 159 inclusive) that are sometimes used for typographical quote marks and similar in proprietary character sets. The validator has found one of these undefined characters in your document. The character may appear on your browser as a curly quote, or a trademark symbol, or some other fancy glyph; on a different computer, however, it will likely appear as a completely different character, or nothing at all.
Your best bet is to replace the character with the nearest equivalent ASCII character, or to use an appropriate character entity. For more information on Character Encoding on the web, see Alan Flavell's excellent HTML Character Set Issues reference.
This error can also be triggered by formatting characters embedded in documents by some word processors. If you use a word processor to edit your HTML documents, be sure to use the "Save as ASCII" or similar command to save the document without formatting information.
…l wp-post-image" alt="Sonderheft der âBremer Beiträge für Naturkunde u. Na…
You have used an illegal character in your text. HTML uses the standard UNICODE Consortium character repertoire, and it leaves undefined (among others) 65 character codes (0 to 31 inclusive and 127 to 159 inclusive) that are sometimes used for typographical quote marks and similar in proprietary character sets. The validator has found one of these undefined characters in your document. The character may appear on your browser as a curly quote, or a trademark symbol, or some other fancy glyph; on a different computer, however, it will likely appear as a completely different character, or nothing at all.
Your best bet is to replace the character with the nearest equivalent ASCII character, or to use an appropriate character entity. For more information on Character Encoding on the web, see Alan Flavell's excellent HTML Character Set Issues reference.
This error can also be triggered by formatting characters embedded in documents by some word processors. If you use a word processor to edit your HTML documents, be sure to use the "Save as ASCII" or similar command to save the document without formatting information.
… wp-post-image" alt="Sonderheft der âBremer Beiträge für Naturkunde u. Nat…
You have used an illegal character in your text. HTML uses the standard UNICODE Consortium character repertoire, and it leaves undefined (among others) 65 character codes (0 to 31 inclusive and 127 to 159 inclusive) that are sometimes used for typographical quote marks and similar in proprietary character sets. The validator has found one of these undefined characters in your document. The character may appear on your browser as a curly quote, or a trademark symbol, or some other fancy glyph; on a different computer, however, it will likely appear as a completely different character, or nothing at all.
Your best bet is to replace the character with the nearest equivalent ASCII character, or to use an appropriate character entity. For more information on Character Encoding on the web, see Alan Flavell's excellent HTML Character Set Issues reference.
This error can also be triggered by formatting characters embedded in documents by some word processors. If you use a word processor to edit your HTML documents, be sure to use the "Save as ASCII" or similar command to save the document without formatting information.
…träge für Naturkunde u. Naturschutzâ über nährstoffarme Stillgewässer" …
You have used an illegal character in your text. HTML uses the standard UNICODE Consortium character repertoire, and it leaves undefined (among others) 65 character codes (0 to 31 inclusive and 127 to 159 inclusive) that are sometimes used for typographical quote marks and similar in proprietary character sets. The validator has found one of these undefined characters in your document. The character may appear on your browser as a curly quote, or a trademark symbol, or some other fancy glyph; on a different computer, however, it will likely appear as a completely different character, or nothing at all.
Your best bet is to replace the character with the nearest equivalent ASCII character, or to use an appropriate character entity. For more information on Character Encoding on the web, see Alan Flavell's excellent HTML Character Set Issues reference.
This error can also be triggered by formatting characters embedded in documents by some word processors. If you use a word processor to edit your HTML documents, be sure to use the "Save as ASCII" or similar command to save the document without formatting information.
…räge für Naturkunde u. Naturschutzâ über nährstoffarme Stillgewässer" l…
You have used an illegal character in your text. HTML uses the standard UNICODE Consortium character repertoire, and it leaves undefined (among others) 65 character codes (0 to 31 inclusive and 127 to 159 inclusive) that are sometimes used for typographical quote marks and similar in proprietary character sets. The validator has found one of these undefined characters in your document. The character may appear on your browser as a curly quote, or a trademark symbol, or some other fancy glyph; on a different computer, however, it will likely appear as a completely different character, or nothing at all.
Your best bet is to replace the character with the nearest equivalent ASCII character, or to use an appropriate character entity. For more information on Character Encoding on the web, see Alan Flavell's excellent HTML Character Set Issues reference.
This error can also be triggered by formatting characters embedded in documents by some word processors. If you use a word processor to edit your HTML documents, be sure to use the "Save as ASCII" or similar command to save the document without formatting information.
…loading="lazy" title="Sonderheft der âBremer Beiträge für Naturkunde u. Na…
You have used an illegal character in your text. HTML uses the standard UNICODE Consortium character repertoire, and it leaves undefined (among others) 65 character codes (0 to 31 inclusive and 127 to 159 inclusive) that are sometimes used for typographical quote marks and similar in proprietary character sets. The validator has found one of these undefined characters in your document. The character may appear on your browser as a curly quote, or a trademark symbol, or some other fancy glyph; on a different computer, however, it will likely appear as a completely different character, or nothing at all.
Your best bet is to replace the character with the nearest equivalent ASCII character, or to use an appropriate character entity. For more information on Character Encoding on the web, see Alan Flavell's excellent HTML Character Set Issues reference.
This error can also be triggered by formatting characters embedded in documents by some word processors. If you use a word processor to edit your HTML documents, be sure to use the "Save as ASCII" or similar command to save the document without formatting information.
…oading="lazy" title="Sonderheft der âBremer Beiträge für Naturkunde u. Nat…
You have used an illegal character in your text. HTML uses the standard UNICODE Consortium character repertoire, and it leaves undefined (among others) 65 character codes (0 to 31 inclusive and 127 to 159 inclusive) that are sometimes used for typographical quote marks and similar in proprietary character sets. The validator has found one of these undefined characters in your document. The character may appear on your browser as a curly quote, or a trademark symbol, or some other fancy glyph; on a different computer, however, it will likely appear as a completely different character, or nothing at all.
Your best bet is to replace the character with the nearest equivalent ASCII character, or to use an appropriate character entity. For more information on Character Encoding on the web, see Alan Flavell's excellent HTML Character Set Issues reference.
This error can also be triggered by formatting characters embedded in documents by some word processors. If you use a word processor to edit your HTML documents, be sure to use the "Save as ASCII" or similar command to save the document without formatting information.
…träge für Naturkunde u. Naturschutzâ über nährstoffarme Stillgewässer" …
You have used an illegal character in your text. HTML uses the standard UNICODE Consortium character repertoire, and it leaves undefined (among others) 65 character codes (0 to 31 inclusive and 127 to 159 inclusive) that are sometimes used for typographical quote marks and similar in proprietary character sets. The validator has found one of these undefined characters in your document. The character may appear on your browser as a curly quote, or a trademark symbol, or some other fancy glyph; on a different computer, however, it will likely appear as a completely different character, or nothing at all.
Your best bet is to replace the character with the nearest equivalent ASCII character, or to use an appropriate character entity. For more information on Character Encoding on the web, see Alan Flavell's excellent HTML Character Set Issues reference.
This error can also be triggered by formatting characters embedded in documents by some word processors. If you use a word processor to edit your HTML documents, be sure to use the "Save as ASCII" or similar command to save the document without formatting information.
…räge für Naturkunde u. Naturschutzâ über nährstoffarme Stillgewässer" s…
You have used an illegal character in your text. HTML uses the standard UNICODE Consortium character repertoire, and it leaves undefined (among others) 65 character codes (0 to 31 inclusive and 127 to 159 inclusive) that are sometimes used for typographical quote marks and similar in proprietary character sets. The validator has found one of these undefined characters in your document. The character may appear on your browser as a curly quote, or a trademark symbol, or some other fancy glyph; on a different computer, however, it will likely appear as a completely different character, or nothing at all.
Your best bet is to replace the character with the nearest equivalent ASCII character, or to use an appropriate character entity. For more information on Character Encoding on the web, see Alan Flavell's excellent HTML Character Set Issues reference.
This error can also be triggered by formatting characters embedded in documents by some word processors. If you use a word processor to edit your HTML documents, be sure to use the "Save as ASCII" or similar command to save the document without formatting information.
…oads/Sonderheft-1-50x50.jpg 50w" sizes="(max-width: 290px) 100vw, 290px" /></a>
For the current document, the validator interprets strings like
<FOO /> according to legacy rules that
break the expectations of most authors and thus cause confusing warnings
and error messages from the validator. This interpretation is triggered
by HTML 4 documents or other SGML-based HTML documents. To avoid the
messages, simply remove the "/" character in such contexts. NB: If you
expect <FOO /> to be interpreted as an
XML-compatible "self-closing" tag, then you need to use XHTML or HTML5.
This warning and related errors may also be caused by an unquoted
attribute value containing one or more "/". Example:
<a href=http://w3c.org>W3C</a>.
In such cases, the solution is to put quotation marks around the value.
… href="http://www.wollingster-see.de/?cat=12" rel="category">Ãlteres</a></div>
You have used an illegal character in your text. HTML uses the standard UNICODE Consortium character repertoire, and it leaves undefined (among others) 65 character codes (0 to 31 inclusive and 127 to 159 inclusive) that are sometimes used for typographical quote marks and similar in proprietary character sets. The validator has found one of these undefined characters in your document. The character may appear on your browser as a curly quote, or a trademark symbol, or some other fancy glyph; on a different computer, however, it will likely appear as a completely different character, or nothing at all.
Your best bet is to replace the character with the nearest equivalent ASCII character, or to use an appropriate character entity. For more information on Character Encoding on the web, see Alan Flavell's excellent HTML Character Set Issues reference.
This error can also be triggered by formatting characters embedded in documents by some word processors. If you use a word processor to edit your HTML documents, be sure to use the "Save as ASCII" or similar command to save the document without formatting information.
…ngster-see.de/?p=616">Sonderheft der âBremer Beiträge für Naturkunde u. Na…
You have used an illegal character in your text. HTML uses the standard UNICODE Consortium character repertoire, and it leaves undefined (among others) 65 character codes (0 to 31 inclusive and 127 to 159 inclusive) that are sometimes used for typographical quote marks and similar in proprietary character sets. The validator has found one of these undefined characters in your document. The character may appear on your browser as a curly quote, or a trademark symbol, or some other fancy glyph; on a different computer, however, it will likely appear as a completely different character, or nothing at all.
Your best bet is to replace the character with the nearest equivalent ASCII character, or to use an appropriate character entity. For more information on Character Encoding on the web, see Alan Flavell's excellent HTML Character Set Issues reference.
This error can also be triggered by formatting characters embedded in documents by some word processors. If you use a word processor to edit your HTML documents, be sure to use the "Save as ASCII" or similar command to save the document without formatting information.
…gster-see.de/?p=616">Sonderheft der âBremer Beiträge für Naturkunde u. Nat…
You have used an illegal character in your text. HTML uses the standard UNICODE Consortium character repertoire, and it leaves undefined (among others) 65 character codes (0 to 31 inclusive and 127 to 159 inclusive) that are sometimes used for typographical quote marks and similar in proprietary character sets. The validator has found one of these undefined characters in your document. The character may appear on your browser as a curly quote, or a trademark symbol, or some other fancy glyph; on a different computer, however, it will likely appear as a completely different character, or nothing at all.
Your best bet is to replace the character with the nearest equivalent ASCII character, or to use an appropriate character entity. For more information on Character Encoding on the web, see Alan Flavell's excellent HTML Character Set Issues reference.
This error can also be triggered by formatting characters embedded in documents by some word processors. If you use a word processor to edit your HTML documents, be sure to use the "Save as ASCII" or similar command to save the document without formatting information.
…träge für Naturkunde u. Naturschutzâ über nährstoffarme Stillgewässer</…
You have used an illegal character in your text. HTML uses the standard UNICODE Consortium character repertoire, and it leaves undefined (among others) 65 character codes (0 to 31 inclusive and 127 to 159 inclusive) that are sometimes used for typographical quote marks and similar in proprietary character sets. The validator has found one of these undefined characters in your document. The character may appear on your browser as a curly quote, or a trademark symbol, or some other fancy glyph; on a different computer, however, it will likely appear as a completely different character, or nothing at all.
Your best bet is to replace the character with the nearest equivalent ASCII character, or to use an appropriate character entity. For more information on Character Encoding on the web, see Alan Flavell's excellent HTML Character Set Issues reference.
This error can also be triggered by formatting characters embedded in documents by some word processors. If you use a word processor to edit your HTML documents, be sure to use the "Save as ASCII" or similar command to save the document without formatting information.
…räge für Naturkunde u. Naturschutzâ über nährstoffarme Stillgewässer</a…
You have used an illegal character in your text. HTML uses the standard UNICODE Consortium character repertoire, and it leaves undefined (among others) 65 character codes (0 to 31 inclusive and 127 to 159 inclusive) that are sometimes used for typographical quote marks and similar in proprietary character sets. The validator has found one of these undefined characters in your document. The character may appear on your browser as a curly quote, or a trademark symbol, or some other fancy glyph; on a different computer, however, it will likely appear as a completely different character, or nothing at all.
Your best bet is to replace the character with the nearest equivalent ASCII character, or to use an appropriate character entity. For more information on Character Encoding on the web, see Alan Flavell's excellent HTML Character Set Issues reference.
This error can also be triggered by formatting characters embedded in documents by some word processors. If you use a word processor to edit your HTML documents, be sure to use the "Save as ASCII" or similar command to save the document without formatting information.
Ein Sonderheft der âBremer Beiträge für Naturkunde u. Naturschutzâ ü…
You have used an illegal character in your text. HTML uses the standard UNICODE Consortium character repertoire, and it leaves undefined (among others) 65 character codes (0 to 31 inclusive and 127 to 159 inclusive) that are sometimes used for typographical quote marks and similar in proprietary character sets. The validator has found one of these undefined characters in your document. The character may appear on your browser as a curly quote, or a trademark symbol, or some other fancy glyph; on a different computer, however, it will likely appear as a completely different character, or nothing at all.
Your best bet is to replace the character with the nearest equivalent ASCII character, or to use an appropriate character entity. For more information on Character Encoding on the web, see Alan Flavell's excellent HTML Character Set Issues reference.
This error can also be triggered by formatting characters embedded in documents by some word processors. If you use a word processor to edit your HTML documents, be sure to use the "Save as ASCII" or similar command to save the document without formatting information.
Ein Sonderheft der âBremer Beiträge für Naturkunde u. Naturschutzâ ü…
You have used an illegal character in your text. HTML uses the standard UNICODE Consortium character repertoire, and it leaves undefined (among others) 65 character codes (0 to 31 inclusive and 127 to 159 inclusive) that are sometimes used for typographical quote marks and similar in proprietary character sets. The validator has found one of these undefined characters in your document. The character may appear on your browser as a curly quote, or a trademark symbol, or some other fancy glyph; on a different computer, however, it will likely appear as a completely different character, or nothing at all.
Your best bet is to replace the character with the nearest equivalent ASCII character, or to use an appropriate character entity. For more information on Character Encoding on the web, see Alan Flavell's excellent HTML Character Set Issues reference.
This error can also be triggered by formatting characters embedded in documents by some word processors. If you use a word processor to edit your HTML documents, be sure to use the "Save as ASCII" or similar command to save the document without formatting information.
…träge für Naturkunde u. Naturschutzâ über nährstoffarme Stillgewässer i…
You have used an illegal character in your text. HTML uses the standard UNICODE Consortium character repertoire, and it leaves undefined (among others) 65 character codes (0 to 31 inclusive and 127 to 159 inclusive) that are sometimes used for typographical quote marks and similar in proprietary character sets. The validator has found one of these undefined characters in your document. The character may appear on your browser as a curly quote, or a trademark symbol, or some other fancy glyph; on a different computer, however, it will likely appear as a completely different character, or nothing at all.
Your best bet is to replace the character with the nearest equivalent ASCII character, or to use an appropriate character entity. For more information on Character Encoding on the web, see Alan Flavell's excellent HTML Character Set Issues reference.
This error can also be triggered by formatting characters embedded in documents by some word processors. If you use a word processor to edit your HTML documents, be sure to use the "Save as ASCII" or similar command to save the document without formatting information.
…räge für Naturkunde u. Naturschutzâ über nährstoffarme Stillgewässer in…
You have used an illegal character in your text. HTML uses the standard UNICODE Consortium character repertoire, and it leaves undefined (among others) 65 character codes (0 to 31 inclusive and 127 to 159 inclusive) that are sometimes used for typographical quote marks and similar in proprietary character sets. The validator has found one of these undefined characters in your document. The character may appear on your browser as a curly quote, or a trademark symbol, or some other fancy glyph; on a different computer, however, it will likely appear as a completely different character, or nothing at all.
Your best bet is to replace the character with the nearest equivalent ASCII character, or to use an appropriate character entity. For more information on Character Encoding on the web, see Alan Flavell's excellent HTML Character Set Issues reference.
This error can also be triggered by formatting characters embedded in documents by some word processors. If you use a word processor to edit your HTML documents, be sure to use the "Save as ASCII" or similar command to save the document without formatting information.
…Rachor zur Entwicklung und zu HilfsmaÃnahmen für unseren See: …
You have used an illegal character in your text. HTML uses the standard UNICODE Consortium character repertoire, and it leaves undefined (among others) 65 character codes (0 to 31 inclusive and 127 to 159 inclusive) that are sometimes used for typographical quote marks and similar in proprietary character sets. The validator has found one of these undefined characters in your document. The character may appear on your browser as a curly quote, or a trademark symbol, or some other fancy glyph; on a different computer, however, it will likely appear as a completely different character, or nothing at all.
Your best bet is to replace the character with the nearest equivalent ASCII character, or to use an appropriate character entity. For more information on Character Encoding on the web, see Alan Flavell's excellent HTML Character Set Issues reference.
This error can also be triggered by formatting characters embedded in documents by some word processors. If you use a word processor to edit your HTML documents, be sure to use the "Save as ASCII" or similar command to save the document without formatting information.
…-4-e1413146397858-50x50.jpg 50w" sizes="(max-width: 290px) 100vw, 290px" /></a>
For the current document, the validator interprets strings like
<FOO /> according to legacy rules that
break the expectations of most authors and thus cause confusing warnings
and error messages from the validator. This interpretation is triggered
by HTML 4 documents or other SGML-based HTML documents. To avoid the
messages, simply remove the "/" character in such contexts. NB: If you
expect <FOO /> to be interpreted as an
XML-compatible "self-closing" tag, then you need to use XHTML or HTML5.
This warning and related errors may also be caused by an unquoted
attribute value containing one or more "/". Example:
<a href=http://w3c.org>W3C</a>.
In such cases, the solution is to put quotation marks around the value.
… href="http://www.wollingster-see.de/?cat=12" rel="category">Ãlteres</a></div>
You have used an illegal character in your text. HTML uses the standard UNICODE Consortium character repertoire, and it leaves undefined (among others) 65 character codes (0 to 31 inclusive and 127 to 159 inclusive) that are sometimes used for typographical quote marks and similar in proprietary character sets. The validator has found one of these undefined characters in your document. The character may appear on your browser as a curly quote, or a trademark symbol, or some other fancy glyph; on a different computer, however, it will likely appear as a completely different character, or nothing at all.
Your best bet is to replace the character with the nearest equivalent ASCII character, or to use an appropriate character entity. For more information on Character Encoding on the web, see Alan Flavell's excellent HTML Character Set Issues reference.
This error can also be triggered by formatting characters embedded in documents by some word processors. If you use a word processor to edit your HTML documents, be sure to use the "Save as ASCII" or similar command to save the document without formatting information.
…r einiges durcheinander gebracht. GroÃe Uferbereiche sind trocken gefallen; d…
You have used an illegal character in your text. HTML uses the standard UNICODE Consortium character repertoire, and it leaves undefined (among others) 65 character codes (0 to 31 inclusive and 127 to 159 inclusive) that are sometimes used for typographical quote marks and similar in proprietary character sets. The validator has found one of these undefined characters in your document. The character may appear on your browser as a curly quote, or a trademark symbol, or some other fancy glyph; on a different computer, however, it will likely appear as a completely different character, or nothing at all.
Your best bet is to replace the character with the nearest equivalent ASCII character, or to use an appropriate character entity. For more information on Character Encoding on the web, see Alan Flavell's excellent HTML Character Set Issues reference.
This error can also be triggered by formatting characters embedded in documents by some word processors. If you use a word processor to edit your HTML documents, be sure to use the "Save as ASCII" or similar command to save the document without formatting information.
… wie selten zuvor (15,00 m über NN; ânormal” sind » <…
You have used an illegal character in your text. HTML uses the standard UNICODE Consortium character repertoire, and it leaves undefined (among others) 65 character codes (0 to 31 inclusive and 127 to 159 inclusive) that are sometimes used for typographical quote marks and similar in proprietary character sets. The validator has found one of these undefined characters in your document. The character may appear on your browser as a curly quote, or a trademark symbol, or some other fancy glyph; on a different computer, however, it will likely appear as a completely different character, or nothing at all.
Your best bet is to replace the character with the nearest equivalent ASCII character, or to use an appropriate character entity. For more information on Character Encoding on the web, see Alan Flavell's excellent HTML Character Set Issues reference.
This error can also be triggered by formatting characters embedded in documents by some word processors. If you use a word processor to edit your HTML documents, be sure to use the "Save as ASCII" or similar command to save the document without formatting information.
…wie selten zuvor (15,00 m über NN; ânormal” sind » <a…
You have used an illegal character in your text. HTML uses the standard UNICODE Consortium character repertoire, and it leaves undefined (among others) 65 character codes (0 to 31 inclusive and 127 to 159 inclusive) that are sometimes used for typographical quote marks and similar in proprietary character sets. The validator has found one of these undefined characters in your document. The character may appear on your browser as a curly quote, or a trademark symbol, or some other fancy glyph; on a different computer, however, it will likely appear as a completely different character, or nothing at all.
Your best bet is to replace the character with the nearest equivalent ASCII character, or to use an appropriate character entity. For more information on Character Encoding on the web, see Alan Flavell's excellent HTML Character Set Issues reference.
This error can also be triggered by formatting characters embedded in documents by some word processors. If you use a word processor to edit your HTML documents, be sure to use the "Save as ASCII" or similar command to save the document without formatting information.
…/uploads/IMG_0013-50x50.jpg 50w" sizes="(max-width: 290px) 100vw, 290px" /></a>
For the current document, the validator interprets strings like
<FOO /> according to legacy rules that
break the expectations of most authors and thus cause confusing warnings
and error messages from the validator. This interpretation is triggered
by HTML 4 documents or other SGML-based HTML documents. To avoid the
messages, simply remove the "/" character in such contexts. NB: If you
expect <FOO /> to be interpreted as an
XML-compatible "self-closing" tag, then you need to use XHTML or HTML5.
This warning and related errors may also be caused by an unquoted
attribute value containing one or more "/". Example:
<a href=http://w3c.org>W3C</a>.
In such cases, the solution is to put quotation marks around the value.
… href="http://www.wollingster-see.de/?cat=12" rel="category">Ãlteres</a></div>
You have used an illegal character in your text. HTML uses the standard UNICODE Consortium character repertoire, and it leaves undefined (among others) 65 character codes (0 to 31 inclusive and 127 to 159 inclusive) that are sometimes used for typographical quote marks and similar in proprietary character sets. The validator has found one of these undefined characters in your document. The character may appear on your browser as a curly quote, or a trademark symbol, or some other fancy glyph; on a different computer, however, it will likely appear as a completely different character, or nothing at all.
Your best bet is to replace the character with the nearest equivalent ASCII character, or to use an appropriate character entity. For more information on Character Encoding on the web, see Alan Flavell's excellent HTML Character Set Issues reference.
This error can also be triggered by formatting characters embedded in documents by some word processors. If you use a word processor to edit your HTML documents, be sure to use the "Save as ASCII" or similar command to save the document without formatting information.
Die auÃerordentlichen Dürren vom Sommer und Herbst in den Jahren 2018 bis…
You have used an illegal character in your text. HTML uses the standard UNICODE Consortium character repertoire, and it leaves undefined (among others) 65 character codes (0 to 31 inclusive and 127 to 159 inclusive) that are sometimes used for typographical quote marks and similar in proprietary character sets. The validator has found one of these undefined characters in your document. The character may appear on your browser as a curly quote, or a trademark symbol, or some other fancy glyph; on a different computer, however, it will likely appear as a completely different character, or nothing at all.
Your best bet is to replace the character with the nearest equivalent ASCII character, or to use an appropriate character entity. For more information on Character Encoding on the web, see Alan Flavell's excellent HTML Character Set Issues reference.
This error can also be triggered by formatting characters embedded in documents by some word processors. If you use a word processor to edit your HTML documents, be sure to use the "Save as ASCII" or similar command to save the document without formatting information.
…lingster-See-2018-50x50.jpg 50w" sizes="(max-width: 290px) 100vw, 290px" /></a>
For the current document, the validator interprets strings like
<FOO /> according to legacy rules that
break the expectations of most authors and thus cause confusing warnings
and error messages from the validator. This interpretation is triggered
by HTML 4 documents or other SGML-based HTML documents. To avoid the
messages, simply remove the "/" character in such contexts. NB: If you
expect <FOO /> to be interpreted as an
XML-compatible "self-closing" tag, then you need to use XHTML or HTML5.
This warning and related errors may also be caused by an unquoted
attribute value containing one or more "/". Example:
<a href=http://w3c.org>W3C</a>.
In such cases, the solution is to put quotation marks around the value.
… href="http://www.wollingster-see.de/?cat=12" rel="category">Ãlteres</a></div>
You have used an illegal character in your text. HTML uses the standard UNICODE Consortium character repertoire, and it leaves undefined (among others) 65 character codes (0 to 31 inclusive and 127 to 159 inclusive) that are sometimes used for typographical quote marks and similar in proprietary character sets. The validator has found one of these undefined characters in your document. The character may appear on your browser as a curly quote, or a trademark symbol, or some other fancy glyph; on a different computer, however, it will likely appear as a completely different character, or nothing at all.
Your best bet is to replace the character with the nearest equivalent ASCII character, or to use an appropriate character entity. For more information on Character Encoding on the web, see Alan Flavell's excellent HTML Character Set Issues reference.
This error can also be triggered by formatting characters embedded in documents by some word processors. If you use a word processor to edit your HTML documents, be sure to use the "Save as ASCII" or similar command to save the document without formatting information.
…tent/uploads/DLRG-50x50.jpg 50w" sizes="(max-width: 290px) 100vw, 290px" /></a>
For the current document, the validator interprets strings like
<FOO /> according to legacy rules that
break the expectations of most authors and thus cause confusing warnings
and error messages from the validator. This interpretation is triggered
by HTML 4 documents or other SGML-based HTML documents. To avoid the
messages, simply remove the "/" character in such contexts. NB: If you
expect <FOO /> to be interpreted as an
XML-compatible "self-closing" tag, then you need to use XHTML or HTML5.
This warning and related errors may also be caused by an unquoted
attribute value containing one or more "/". Example:
<a href=http://w3c.org>W3C</a>.
In such cases, the solution is to put quotation marks around the value.
… href="http://www.wollingster-see.de/?cat=12" rel="category">Ãlteres</a></div>
You have used an illegal character in your text. HTML uses the standard UNICODE Consortium character repertoire, and it leaves undefined (among others) 65 character codes (0 to 31 inclusive and 127 to 159 inclusive) that are sometimes used for typographical quote marks and similar in proprietary character sets. The validator has found one of these undefined characters in your document. The character may appear on your browser as a curly quote, or a trademark symbol, or some other fancy glyph; on a different computer, however, it will likely appear as a completely different character, or nothing at all.
Your best bet is to replace the character with the nearest equivalent ASCII character, or to use an appropriate character entity. For more information on Character Encoding on the web, see Alan Flavell's excellent HTML Character Set Issues reference.
This error can also be triggered by formatting characters embedded in documents by some word processors. If you use a word processor to edit your HTML documents, be sure to use the "Save as ASCII" or similar command to save the document without formatting information.
…ingebracht werden konnte. Ziel der MaÃnahme ist es, den Wasserablauf des Woll…
You have used an illegal character in your text. HTML uses the standard UNICODE Consortium character repertoire, and it leaves undefined (among others) 65 character codes (0 to 31 inclusive and 127 to 159 inclusive) that are sometimes used for typographical quote marks and similar in proprietary character sets. The validator has found one of these undefined characters in your document. The character may appear on your browser as a curly quote, or a trademark symbol, or some other fancy glyph; on a different computer, however, it will likely appear as a completely different character, or nothing at all.
Your best bet is to replace the character with the nearest equivalent ASCII character, or to use an appropriate character entity. For more information on Character Encoding on the web, see Alan Flavell's excellent HTML Character Set Issues reference.
This error can also be triggered by formatting characters embedded in documents by some word processors. If you use a word processor to edit your HTML documents, be sure to use the "Save as ASCII" or similar command to save the document without formatting information.
…loads/Kaulquappen-50x50.jpg 50w" sizes="(max-width: 290px) 100vw, 290px" /></a>
For the current document, the validator interprets strings like
<FOO /> according to legacy rules that
break the expectations of most authors and thus cause confusing warnings
and error messages from the validator. This interpretation is triggered
by HTML 4 documents or other SGML-based HTML documents. To avoid the
messages, simply remove the "/" character in such contexts. NB: If you
expect <FOO /> to be interpreted as an
XML-compatible "self-closing" tag, then you need to use XHTML or HTML5.
This warning and related errors may also be caused by an unquoted
attribute value containing one or more "/". Example:
<a href=http://w3c.org>W3C</a>.
In such cases, the solution is to put quotation marks around the value.
… href="http://www.wollingster-see.de/?cat=12" rel="category">Ãlteres</a></div>
You have used an illegal character in your text. HTML uses the standard UNICODE Consortium character repertoire, and it leaves undefined (among others) 65 character codes (0 to 31 inclusive and 127 to 159 inclusive) that are sometimes used for typographical quote marks and similar in proprietary character sets. The validator has found one of these undefined characters in your document. The character may appear on your browser as a curly quote, or a trademark symbol, or some other fancy glyph; on a different computer, however, it will likely appear as a completely different character, or nothing at all.
Your best bet is to replace the character with the nearest equivalent ASCII character, or to use an appropriate character entity. For more information on Character Encoding on the web, see Alan Flavell's excellent HTML Character Set Issues reference.
This error can also be triggered by formatting characters embedded in documents by some word processors. If you use a word processor to edit your HTML documents, be sure to use the "Save as ASCII" or similar command to save the document without formatting information.
…nt/uploads/Frosch-50x50.jpg 50w" sizes="(max-width: 290px) 100vw, 290px" /></a>
For the current document, the validator interprets strings like
<FOO /> according to legacy rules that
break the expectations of most authors and thus cause confusing warnings
and error messages from the validator. This interpretation is triggered
by HTML 4 documents or other SGML-based HTML documents. To avoid the
messages, simply remove the "/" character in such contexts. NB: If you
expect <FOO /> to be interpreted as an
XML-compatible "self-closing" tag, then you need to use XHTML or HTML5.
This warning and related errors may also be caused by an unquoted
attribute value containing one or more "/". Example:
<a href=http://w3c.org>W3C</a>.
In such cases, the solution is to put quotation marks around the value.
… href="http://www.wollingster-see.de/?cat=12" rel="category">Ãlteres</a></div>
You have used an illegal character in your text. HTML uses the standard UNICODE Consortium character repertoire, and it leaves undefined (among others) 65 character codes (0 to 31 inclusive and 127 to 159 inclusive) that are sometimes used for typographical quote marks and similar in proprietary character sets. The validator has found one of these undefined characters in your document. The character may appear on your browser as a curly quote, or a trademark symbol, or some other fancy glyph; on a different computer, however, it will likely appear as a completely different character, or nothing at all.
Your best bet is to replace the character with the nearest equivalent ASCII character, or to use an appropriate character entity. For more information on Character Encoding on the web, see Alan Flavell's excellent HTML Character Set Issues reference.
This error can also be triggered by formatting characters embedded in documents by some word processors. If you use a word processor to edit your HTML documents, be sure to use the "Save as ASCII" or similar command to save the document without formatting information.
…see.de/wp-content/uploads/200px-Naturschutzgebiet_Niedersachsen.png"></p></div>
The attribute given above is required for an element that you've used, but you have omitted it. For instance, in most HTML and XHTML document types the "type" attribute is required on the "script" element and the "alt" attribute is required for the "img" element.
Typical values for type are
type="text/css" for <style>
and type="text/javascript" for <script>.
…src="http://wollingster-see.de/wp-content/uploads/150px-BUND-Logo.png"></a></p>
The attribute given above is required for an element that you've used, but you have omitted it. For instance, in most HTML and XHTML document types the "type" attribute is required on the "script" element and the "alt" attribute is required for the "img" element.
Typical values for type are
type="text/css" for <style>
and type="text/javascript" for <script>.
…g src="http://wollingster-see.de/wp-content/uploads/130px-Leader-Logo.jpg"></p>
The attribute given above is required for an element that you've used, but you have omitted it. For instance, in most HTML and XHTML document types the "type" attribute is required on the "script" element and the "alt" attribute is required for the "img" element.
Typical values for type are
type="text/css" for <style>
and type="text/javascript" for <script>.
…g src="http://wollingster-see.de/wp-content/uploads/130px-Leader-Logo.jpg"></p>
The next message, "start tag was here"
points to the particular instance of the tag in question); the
positional indicator points to where the validator expected you to close the
tag.
<p style="margin-left:40px"><a href="http://ec.europa.eu/agriculture/rur/leader…
…lingster-see.de/wp-content/uploads/150px-Bingostiftung-Logo.png"></a></p></div>
The attribute given above is required for an element that you've used, but you have omitted it. For instance, in most HTML and XHTML document types the "type" attribute is required on the "script" element and the "alt" attribute is required for the "img" element.
Typical values for type are
type="text/css" for <style>
and type="text/javascript" for <script>.
All Rights Reserved.--><br />
For the current document, the validator interprets strings like
<FOO /> according to legacy rules that
break the expectations of most authors and thus cause confusing warnings
and error messages from the validator. This interpretation is triggered
by HTML 4 documents or other SGML-based HTML documents. To avoid the
messages, simply remove the "/" character in such contexts. NB: If you
expect <FOO /> to be interpreted as an
XML-compatible "self-closing" tag, then you need to use XHTML or HTML5.
This warning and related errors may also be caused by an unquoted
attribute value containing one or more "/". Example:
<a href=http://w3c.org>W3C</a>.
In such cases, the solution is to put quotation marks around the value.
…"credits">Based on a design by <a href="http://wpshower.com">WPSHOWER</a><br />
For the current document, the validator interprets strings like
<FOO /> according to legacy rules that
break the expectations of most authors and thus cause confusing warnings
and error messages from the validator. This interpretation is triggered
by HTML 4 documents or other SGML-based HTML documents. To avoid the
messages, simply remove the "/" character in such contexts. NB: If you
expect <FOO /> to be interpreted as an
XML-compatible "self-closing" tag, then you need to use XHTML or HTML5.
This warning and related errors may also be caused by an unquoted
attribute value containing one or more "/". Example:
<a href=http://w3c.org>W3C</a>.
In such cases, the solution is to put quotation marks around the value.
Below is the source input I used for this validation: