Markup Validation Service
Check the markup (HTML, XHTML, …) of Web documents
Markup Validation Service
Check the markup (HTML, XHTML, …) of Web documents
Line 4,
Column 22:
character "&" is the first character of a delimiter but occurred as data
<title>Tomb Raider 3 & The lost Artefact- Lösung-www.laraunlimited.de</title>This message may appear in several cases:
Line 10,
Column 114:
character "&" is the first character of a delimiter but occurred as data
…s, Tipps und Tricks für Tomb Raider 3 & The lost Artefact Directors Cut auf ww…This message may appear in several cases:
Line 10,
Column 174:
end tag for "meta" omitted, but OMITTAG NO was specified
… für Tomb Raider 3 & The lost Artefact Directors Cut auf www.laraunlimited.de">You may have neglected to close an element, or perhaps you meant to "self-close" an element, that is, ending it with "/>" instead of ">".
Line 10,
Column 1:
start tag was here
<meta name="description" content="Komplettlösung mit Bildschirmfotos, Cheats, T……nt.layers || (document.getElementById && !document.all)) && (e.which==2 || e.w…This message may appear in several cases:
Line 22,
Column 55:
character "&" is the first character of a delimiter but occurred as data
…t.layers || (document.getElementById && !document.all)) && (e.which==2 || e.wh…This message may appear in several cases:
Line 22,
Column 73:
character "&" is the first character of a delimiter but occurred as data
…|| (document.getElementById && !document.all)) && (e.which==2 || e.which==3)) {This message may appear in several cases:
Line 22,
Column 74:
character "&" is the first character of a delimiter but occurred as data
…|| (document.getElementById && !document.all)) && (e.which==2 || e.which==3)) {This message may appear in several cases:
Line 37,
Column 25:
character "&" is the first character of a delimiter but occurred as data
else if (document.all && !document.getElementById){This message may appear in several cases:
Line 37,
Column 26:
character "&" is the first character of a delimiter but occurred as data
else if (document.all && !document.getElementById){This message may appear in several cases:
Line 44,
Column 1:
character "<" is the first character of a delimiter but occurred as data
<<link rel="stylesheet" type="text/css"href="http://www.laraunlimited.de/menu/s…This message may appear in several cases:
Line 44,
Column 1:
character data is not allowed here
<<link rel="stylesheet" type="text/css"href="http://www.laraunlimited.de/menu/s…You have used character data somewhere it is not permitted to appear. Mistakes that can cause this error include:
Line 66,
Column 86:
there is no attribute "border"
…/statistik/track.php?mode=img" border="0" alt="" width="1" height="1"></noscri…You have used the attribute named above in your document, but the document type you are using does not support that attribute for this element. This error is often caused by incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Transitional" document type to get the "target" attribute), or by using vendor proprietary extensions such as "marginheight" (this is usually fixed by using CSS to achieve the desired effect instead).
This error may also result if the element itself is not supported in the document type you are using, as an undefined element will have no supported attributes; in this case, see the element-undefined error message for further information.
How to fix: check the spelling and case of the element and attribute, (Remember XHTML is all lower-case) and/or check that they are both allowed in the chosen document type, and/or use CSS instead of this attribute. If you received this error when using the <embed> element to incorporate flash media in a Web page, see the FAQ item on valid flash.
Line 66,
Column 117:
document type does not allow element "img" here; missing one of "p", "h1", "h2", "h3", "h4", "h5", "h6", "div", "address", "fieldset", "ins", "del" start-tag
…tatistik/track.php?mode=img" border="0" alt="" width="1" height="1"></noscript>The mentioned element is not allowed to appear in the context in which you've placed it; the other mentioned elements are the only ones that are both allowed there and can contain the element mentioned. This might mean that you need a containing element, or possibly that you've forgotten to close a previous element.
One possible cause for this message is that you have attempted to put a block-level element (such as "<p>" or "<table>") inside an inline element (such as "<a>", "<span>", or "<font>").
Line 66,
Column 128:
end tag for "img" omitted, but OMITTAG NO was specified
…tatistik/track.php?mode=img" border="0" alt="" width="1" height="1"></noscript>You may have neglected to close an element, or perhaps you meant to "self-close" an element, that is, ending it with "/>" instead of ">".
Line 66,
Column 11:
start tag was here
<noscript><img src="http://www.laraunlimited.de/statistik/track.php?mode=img" b…<iframe src="http://www.laraunlimited.de/headmenue.htm" style="padding-bottom:4…You have used the attribute named above in your document, but the document type you are using does not support that attribute for this element. This error is often caused by incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Transitional" document type to get the "target" attribute), or by using vendor proprietary extensions such as "marginheight" (this is usually fixed by using CSS to achieve the desired effect instead).
This error may also result if the element itself is not supported in the document type you are using, as an undefined element will have no supported attributes; in this case, see the element-undefined error message for further information.
How to fix: check the spelling and case of the element and attribute, (Remember XHTML is all lower-case) and/or check that they are both allowed in the chosen document type, and/or use CSS instead of this attribute. If you received this error when using the <embed> element to incorporate flash media in a Web page, see the FAQ item on valid flash.
Line 69,
Column 63:
there is no attribute "style"
…laraunlimited.de/headmenue.htm" style="padding-bottom:4px; width:100%; height:…You have used the attribute named above in your document, but the document type you are using does not support that attribute for this element. This error is often caused by incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Transitional" document type to get the "target" attribute), or by using vendor proprietary extensions such as "marginheight" (this is usually fixed by using CSS to achieve the desired effect instead).
This error may also result if the element itself is not supported in the document type you are using, as an undefined element will have no supported attributes; in this case, see the element-undefined error message for further information.
How to fix: check the spelling and case of the element and attribute, (Remember XHTML is all lower-case) and/or check that they are both allowed in the chosen document type, and/or use CSS instead of this attribute. If you received this error when using the <embed> element to incorporate flash media in a Web page, see the FAQ item on valid flash.
Line 69,
Column 122:
there is no attribute "frameborder"
…width:100%; height:35px;" frameborder="no" scrolling="no">Sorry but your brows…You have used the attribute named above in your document, but the document type you are using does not support that attribute for this element. This error is often caused by incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Transitional" document type to get the "target" attribute), or by using vendor proprietary extensions such as "marginheight" (this is usually fixed by using CSS to achieve the desired effect instead).
This error may also result if the element itself is not supported in the document type you are using, as an undefined element will have no supported attributes; in this case, see the element-undefined error message for further information.
How to fix: check the spelling and case of the element and attribute, (Remember XHTML is all lower-case) and/or check that they are both allowed in the chosen document type, and/or use CSS instead of this attribute. If you received this error when using the <embed> element to incorporate flash media in a Web page, see the FAQ item on valid flash.
Line 69,
Column 137:
there is no attribute "scrolling"
…ght:35px;" frameborder="no" scrolling="no">Sorry but your browser does not sup…You have used the attribute named above in your document, but the document type you are using does not support that attribute for this element. This error is often caused by incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Transitional" document type to get the "target" attribute), or by using vendor proprietary extensions such as "marginheight" (this is usually fixed by using CSS to achieve the desired effect instead).
This error may also result if the element itself is not supported in the document type you are using, as an undefined element will have no supported attributes; in this case, see the element-undefined error message for further information.
How to fix: check the spelling and case of the element and attribute, (Remember XHTML is all lower-case) and/or check that they are both allowed in the chosen document type, and/or use CSS instead of this attribute. If you received this error when using the <embed> element to incorporate flash media in a Web page, see the FAQ item on valid flash.
Line 69,
Column 141:
element "iframe" undefined
…35px;" frameborder="no" scrolling="no">Sorry but your browser does not support…You have used the element named above in your document, but the document type you are using does not define an element of that name. This error is often caused by:
Line 73,
Column 14:
an attribute value specification must be an attribute value literal unless SHORTTAG YES is specified
<form method=post action="/suche/suche.php"> <input type="text……=post action="/suche/suche.php"> <input type="text" name="sea…You have used character data somewhere it is not permitted to appear. Mistakes that can cause this error include:
Line 73,
Column 187:
document type does not allow element "input" here; missing one of "p", "h1", "h2", "h3", "h4", "h5", "h6", "div", "pre", "address", "fieldset", "ins", "del" start-tag
…orm" value="Suche" size="10" style="background-color:#333333; color:#ffffff;" >The mentioned element is not allowed to appear in the context in which you've placed it; the other mentioned elements are the only ones that are both allowed there and can contain the element mentioned. This might mean that you need a containing element, or possibly that you've forgotten to close a previous element.
One possible cause for this message is that you have attempted to put a block-level element (such as "<p>" or "<table>") inside an inline element (such as "<a>", "<span>", or "<font>").
Line 73,
Column 188:
end tag for "input" omitted, but OMITTAG NO was specified
…orm" value="Suche" size="10" style="background-color:#333333; color:#ffffff;" >You may have neglected to close an element, or perhaps you meant to "self-close" an element, that is, ending it with "/>" instead of ">".
Line 73,
Column 63:
start tag was here
…="/suche/suche.php"> <input type="text" name="search_exp" cla…<br/><br/><input type="image" name="image" class="searchSubmit inputImage" src=…The mentioned element is not allowed to appear in the context in which you've placed it; the other mentioned elements are the only ones that are both allowed there and can contain the element mentioned. This might mean that you need a containing element, or possibly that you've forgotten to close a previous element.
One possible cause for this message is that you have attempted to put a block-level element (such as "<p>" or "<table>") inside an inline element (such as "<a>", "<span>", or "<font>").
Line 74,
Column 10:
document type does not allow element "br" here; missing one of "p", "h1", "h2", "h3", "h4", "h5", "h6", "div", "pre", "address", "fieldset", "ins", "del" start-tag
<br/><br/><input type="image" name="image" class="searchSubmit inputImage" src=…The mentioned element is not allowed to appear in the context in which you've placed it; the other mentioned elements are the only ones that are both allowed there and can contain the element mentioned. This might mean that you need a containing element, or possibly that you've forgotten to close a previous element.
One possible cause for this message is that you have attempted to put a block-level element (such as "<p>" or "<table>") inside an inline element (such as "<a>", "<span>", or "<font>").
Line 74,
Column 174:
document type does not allow element "input" here; missing one of "p", "h1", "h2", "h3", "h4", "h5", "h6", "div", "pre", "address", "fieldset", "ins", "del" start-tag
…ed.de/images/suche.png" title="Starte Suche" style="padding-left:80px;"></form>The mentioned element is not allowed to appear in the context in which you've placed it; the other mentioned elements are the only ones that are both allowed there and can contain the element mentioned. This might mean that you need a containing element, or possibly that you've forgotten to close a previous element.
One possible cause for this message is that you have attempted to put a block-level element (such as "<p>" or "<table>") inside an inline element (such as "<a>", "<span>", or "<font>").
Line 74,
Column 181:
end tag for "input" omitted, but OMITTAG NO was specified
…ed.de/images/suche.png" title="Starte Suche" style="padding-left:80px;"></form>You may have neglected to close an element, or perhaps you meant to "self-close" an element, that is, ending it with "/>" instead of ">".
Line 74,
Column 11:
start tag was here
<br/><br/><input type="image" name="image" class="searchSubmit inputImage" src=… <a href="http://www.laraunlimited.de/menu/navi.htm">Site map</a>The mentioned element is not allowed to appear in the context in which you've placed it; the other mentioned elements are the only ones that are both allowed there and can contain the element mentioned. This might mean that you need a containing element, or possibly that you've forgotten to close a previous element.
One possible cause for this message is that you have attempted to put a block-level element (such as "<p>" or "<table>") inside an inline element (such as "<a>", "<span>", or "<font>").
Line 85,
Column 33:
there is no attribute "name"
<td><img src="tomb3.jpg" name="b882" border="0" width="150" height="200" alt=…You have used the attribute named above in your document, but the document type you are using does not support that attribute for this element. This error is often caused by incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Transitional" document type to get the "target" attribute), or by using vendor proprietary extensions such as "marginheight" (this is usually fixed by using CSS to achieve the desired effect instead).
This error may also result if the element itself is not supported in the document type you are using, as an undefined element will have no supported attributes; in this case, see the element-undefined error message for further information.
How to fix: check the spelling and case of the element and attribute, (Remember XHTML is all lower-case) and/or check that they are both allowed in the chosen document type, and/or use CSS instead of this attribute. If you received this error when using the <embed> element to incorporate flash media in a Web page, see the FAQ item on valid flash.
Line 112,
Column 68:
cannot generate system identifier for general entity "g"
…w.mogelpower.de/cheats/query.php?pf=2&g=13712" target="_blank">Playstationchea…An entity reference was found in the document, but there is no reference by that name defined. Often this is caused by misspelling the reference name, unencoded ampersands, or by leaving off the trailing semicolon (;). The most common cause of this error is unencoded ampersands in URLs as described by the WDG in "Ampersands in URLs".
Entity references start with an ampersand (&) and end with a semicolon (;). If you want to use a literal ampersand in your document you must encode it as "&" (even inside URLs!). Be careful to end entity references with a semicolon or your entity reference may get interpreted in connection with the following text. Also keep in mind that named entity references are case-sensitive; &Aelig; and æ are different characters.
If this error appears in some markup generated by PHP's session handling code, this article has explanations and solutions to your problem.
Note that in most documents, errors related to entity references will trigger up to 5 separate messages from the Validator. Usually these will all disappear when the original problem is fixed.
Line 112,
Column 68:
general entity "g" not defined and no default entity
…w.mogelpower.de/cheats/query.php?pf=2&g=13712" target="_blank">Playstationchea…This is usually a cascading error caused by a an undefined entity reference or use of an unencoded ampersand (&) in an URL or body text. See the previous message for further details.
Line 112,
Column 69:
reference not terminated by REFC delimiter
….mogelpower.de/cheats/query.php?pf=2&g=13712" target="_blank">Playstationcheat…If you meant to include an entity that starts with "&", then you should terminate it with ";". Another reason for this error message is that you inadvertently created an entity by failing to escape an "&" character just before this text.
Line 112,
Column 69:
reference to external entity in attribute value
….mogelpower.de/cheats/query.php?pf=2&g=13712" target="_blank">Playstationcheat…This is generally the sign of an ampersand that was not properly escaped for inclusion in an attribute, in a href for example. You will need to escape all instances of '&' into '&'.
Line 112,
Column 69:
reference to entity "g" for which no system identifier could be generated
….mogelpower.de/cheats/query.php?pf=2&g=13712" target="_blank">Playstationcheat…This is usually a cascading error caused by a an undefined entity reference or use of an unencoded ampersand (&) in an URL or body text. See the previous message for further details.
Line 112,
Column 67:
entity was defined here
…ww.mogelpower.de/cheats/query.php?pf=2&g=13712" target="_blank">Playstationche……er.de/cheats/query.php?pf=2&g=13712" target="_blank">Playstationcheats</a></h2>You have used the attribute named above in your document, but the document type you are using does not support that attribute for this element. This error is often caused by incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Transitional" document type to get the "target" attribute), or by using vendor proprietary extensions such as "marginheight" (this is usually fixed by using CSS to achieve the desired effect instead).
This error may also result if the element itself is not supported in the document type you are using, as an undefined element will have no supported attributes; in this case, see the element-undefined error message for further information.
How to fix: check the spelling and case of the element and attribute, (Remember XHTML is all lower-case) and/or check that they are both allowed in the chosen document type, and/or use CSS instead of this attribute. If you received this error when using the <embed> element to incorporate flash media in a Web page, see the FAQ item on valid flash.
Line 140,
Column 79:
document type does not allow element "p" here; missing one of "object", "ins", "del", "map", "button" start-tag
…color:#FFF; width:445px; padding:5px;"> Tomb Raider 3 auf modernen Betriebssys…The mentioned element is not allowed to appear in the context in which you've placed it; the other mentioned elements are the only ones that are both allowed there and can contain the element mentioned. This might mean that you need a containing element, or possibly that you've forgotten to close a previous element.
One possible cause for this message is that you have attempted to put a block-level element (such as "<p>" or "<table>") inside an inline element (such as "<a>", "<span>", or "<font>").
Line 164,
Column 18:
there is no attribute "src"
<td><embed src="03.mp3" width="280" height="45" autostart="false"/></td>You have used the attribute named above in your document, but the document type you are using does not support that attribute for this element. This error is often caused by incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Transitional" document type to get the "target" attribute), or by using vendor proprietary extensions such as "marginheight" (this is usually fixed by using CSS to achieve the desired effect instead).
This error may also result if the element itself is not supported in the document type you are using, as an undefined element will have no supported attributes; in this case, see the element-undefined error message for further information.
How to fix: check the spelling and case of the element and attribute, (Remember XHTML is all lower-case) and/or check that they are both allowed in the chosen document type, and/or use CSS instead of this attribute. If you received this error when using the <embed> element to incorporate flash media in a Web page, see the FAQ item on valid flash.
Line 164,
Column 33:
there is no attribute "width"
<td><embed src="03.mp3" width="280" height="45" autostart="false"/></td>You have used the attribute named above in your document, but the document type you are using does not support that attribute for this element. This error is often caused by incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Transitional" document type to get the "target" attribute), or by using vendor proprietary extensions such as "marginheight" (this is usually fixed by using CSS to achieve the desired effect instead).
This error may also result if the element itself is not supported in the document type you are using, as an undefined element will have no supported attributes; in this case, see the element-undefined error message for further information.
How to fix: check the spelling and case of the element and attribute, (Remember XHTML is all lower-case) and/or check that they are both allowed in the chosen document type, and/or use CSS instead of this attribute. If you received this error when using the <embed> element to incorporate flash media in a Web page, see the FAQ item on valid flash.
Line 164,
Column 46:
there is no attribute "height"
<td><embed src="03.mp3" width="280" height="45" autostart="false"/></td>You have used the attribute named above in your document, but the document type you are using does not support that attribute for this element. This error is often caused by incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Transitional" document type to get the "target" attribute), or by using vendor proprietary extensions such as "marginheight" (this is usually fixed by using CSS to achieve the desired effect instead).
This error may also result if the element itself is not supported in the document type you are using, as an undefined element will have no supported attributes; in this case, see the element-undefined error message for further information.
How to fix: check the spelling and case of the element and attribute, (Remember XHTML is all lower-case) and/or check that they are both allowed in the chosen document type, and/or use CSS instead of this attribute. If you received this error when using the <embed> element to incorporate flash media in a Web page, see the FAQ item on valid flash.
Line 164,
Column 61:
there is no attribute "autostart"
<td><embed src="03.mp3" width="280" height="45" autostart="false"/></td>You have used the attribute named above in your document, but the document type you are using does not support that attribute for this element. This error is often caused by incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Transitional" document type to get the "target" attribute), or by using vendor proprietary extensions such as "marginheight" (this is usually fixed by using CSS to achieve the desired effect instead).
This error may also result if the element itself is not supported in the document type you are using, as an undefined element will have no supported attributes; in this case, see the element-undefined error message for further information.
How to fix: check the spelling and case of the element and attribute, (Remember XHTML is all lower-case) and/or check that they are both allowed in the chosen document type, and/or use CSS instead of this attribute. If you received this error when using the <embed> element to incorporate flash media in a Web page, see the FAQ item on valid flash.
Line 164,
Column 69:
element "embed" undefined
<td><embed src="03.mp3" width="280" height="45" autostart="false"/></td>You have used the element named above in your document, but the document type you are using does not define an element of that name. This error is often caused by:
Line 166,
Column 69:
element "embed" undefined
<td><embed src="04.mp3" width="280" height="45" autostart="false"/></td>You have used the element named above in your document, but the document type you are using does not define an element of that name. This error is often caused by:
Line 176,
Column 74:
end tag for "img" omitted, but OMITTAG NO was specified
<td><img src="tr3g.jpg" border="0" width="230" height="170" alt=""></td>You may have neglected to close an element, or perhaps you meant to "self-close" an element, that is, ending it with "/>" instead of ">".
Line 176,
Column 7:
start tag was here
<td><img src="tr3g.jpg" border="0" width="230" height="170" alt=""></td>….laraunlimited.de/images/pyramiden.gif" width="80" height="40" border="0"/></p>The attribute given above is required for an element that you've used, but you have omitted it. For instance, in most HTML and XHTML document types the "type" attribute is required on the "script" element and the "alt" attribute is required for the "img" element.
Typical values for type are
type="text/css" for <style>
and type="text/javascript" for <script>.
Line 210,
Column 12:
there is no attribute "NAME"
<form NAME="uhr" style="background-image:url(images/platz.gif); background-repe…You have used the attribute named above in your document, but the document type you are using does not support that attribute for this element. This error is often caused by incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Transitional" document type to get the "target" attribute), or by using vendor proprietary extensions such as "marginheight" (this is usually fixed by using CSS to achieve the desired effect instead).
This error may also result if the element itself is not supported in the document type you are using, as an undefined element will have no supported attributes; in this case, see the element-undefined error message for further information.
How to fix: check the spelling and case of the element and attribute, (Remember XHTML is all lower-case) and/or check that they are both allowed in the chosen document type, and/or use CSS instead of this attribute. If you received this error when using the <embed> element to incorporate flash media in a Web page, see the FAQ item on valid flash.
Line 210,
Column 119:
required attribute "action" not specified
…:url(images/platz.gif); background-repeat:no-repeat; margin:0px; padding:0px;">The attribute given above is required for an element that you've used, but you have omitted it. For instance, in most HTML and XHTML document types the "type" attribute is required on the "script" element and the "alt" attribute is required for the "img" element.
Typical values for type are
type="text/css" for <style>
and type="text/javascript" for <script>.
Line 211,
Column 13:
there is no attribute "TYPE"
<input TYPE="text" NAME="zeit" SIZE=10 VALUE ="" style="color:#FFCC77; backgrou…You have used the attribute named above in your document, but the document type you are using does not support that attribute for this element. This error is often caused by incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Transitional" document type to get the "target" attribute), or by using vendor proprietary extensions such as "marginheight" (this is usually fixed by using CSS to achieve the desired effect instead).
This error may also result if the element itself is not supported in the document type you are using, as an undefined element will have no supported attributes; in this case, see the element-undefined error message for further information.
How to fix: check the spelling and case of the element and attribute, (Remember XHTML is all lower-case) and/or check that they are both allowed in the chosen document type, and/or use CSS instead of this attribute. If you received this error when using the <embed> element to incorporate flash media in a Web page, see the FAQ item on valid flash.
Line 211,
Column 25:
there is no attribute "NAME"
<input TYPE="text" NAME="zeit" SIZE=10 VALUE ="" style="color:#FFCC77; backgrou…You have used the attribute named above in your document, but the document type you are using does not support that attribute for this element. This error is often caused by incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Transitional" document type to get the "target" attribute), or by using vendor proprietary extensions such as "marginheight" (this is usually fixed by using CSS to achieve the desired effect instead).
This error may also result if the element itself is not supported in the document type you are using, as an undefined element will have no supported attributes; in this case, see the element-undefined error message for further information.
How to fix: check the spelling and case of the element and attribute, (Remember XHTML is all lower-case) and/or check that they are both allowed in the chosen document type, and/or use CSS instead of this attribute. If you received this error when using the <embed> element to incorporate flash media in a Web page, see the FAQ item on valid flash.
Line 211,
Column 37:
there is no attribute "SIZE"
<input TYPE="text" NAME="zeit" SIZE=10 VALUE ="" style="color:#FFCC77; backgrou…You have used the attribute named above in your document, but the document type you are using does not support that attribute for this element. This error is often caused by incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Transitional" document type to get the "target" attribute), or by using vendor proprietary extensions such as "marginheight" (this is usually fixed by using CSS to achieve the desired effect instead).
This error may also result if the element itself is not supported in the document type you are using, as an undefined element will have no supported attributes; in this case, see the element-undefined error message for further information.
How to fix: check the spelling and case of the element and attribute, (Remember XHTML is all lower-case) and/or check that they are both allowed in the chosen document type, and/or use CSS instead of this attribute. If you received this error when using the <embed> element to incorporate flash media in a Web page, see the FAQ item on valid flash.
Line 211,
Column 37:
an attribute value specification must be an attribute value literal unless SHORTTAG YES is specified
<input TYPE="text" NAME="zeit" SIZE=10 VALUE ="" style="color:#FFCC77; backgrou……YPE="text" NAME="zeit" SIZE=10 VALUE ="" style="color:#FFCC77; background-colo…You have used the attribute named above in your document, but the document type you are using does not support that attribute for this element. This error is often caused by incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Transitional" document type to get the "target" attribute), or by using vendor proprietary extensions such as "marginheight" (this is usually fixed by using CSS to achieve the desired effect instead).
This error may also result if the element itself is not supported in the document type you are using, as an undefined element will have no supported attributes; in this case, see the element-undefined error message for further information.
How to fix: check the spelling and case of the element and attribute, (Remember XHTML is all lower-case) and/or check that they are both allowed in the chosen document type, and/or use CSS instead of this attribute. If you received this error when using the <embed> element to incorporate flash media in a Web page, see the FAQ item on valid flash.
Line 211,
Column 246:
document type does not allow element "input" here; missing one of "p", "h1", "h2", "h3", "h4", "h5", "h6", "div", "pre", "address", "fieldset", "ins", "del" start-tag
…ont-weight:bold; letter-spacing:2px; position:relative; top:-16px; left:48px;">The mentioned element is not allowed to appear in the context in which you've placed it; the other mentioned elements are the only ones that are both allowed there and can contain the element mentioned. This might mean that you need a containing element, or possibly that you've forgotten to close a previous element.
One possible cause for this message is that you have attempted to put a block-level element (such as "<p>" or "<table>") inside an inline element (such as "<a>", "<span>", or "<font>").
Line 211,
Column 247:
end tag for "input" omitted, but OMITTAG NO was specified
…ont-weight:bold; letter-spacing:2px; position:relative; top:-16px; left:48px;">You may have neglected to close an element, or perhaps you meant to "self-close" an element, that is, ending it with "/>" instead of ">".
Line 211,
Column 1:
start tag was here
<input TYPE="text" NAME="zeit" SIZE=10 VALUE ="" style="color:#FFCC77; backgrou…<SCRIPT type="text/javascript">You have used the attribute named above in your document, but the document type you are using does not support that attribute for this element. This error is often caused by incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Transitional" document type to get the "target" attribute), or by using vendor proprietary extensions such as "marginheight" (this is usually fixed by using CSS to achieve the desired effect instead).
This error may also result if the element itself is not supported in the document type you are using, as an undefined element will have no supported attributes; in this case, see the element-undefined error message for further information.
How to fix: check the spelling and case of the element and attribute, (Remember XHTML is all lower-case) and/or check that they are both allowed in the chosen document type, and/or use CSS instead of this attribute. If you received this error when using the <embed> element to incorporate flash media in a Web page, see the FAQ item on valid flash.
Line 213,
Column 31:
element "SCRIPT" undefined
<SCRIPT type="text/javascript">You have used the element named above in your document, but the document type you are using does not define an element of that name. This error is often caused by:
Line 241,
Column 208:
required attribute "alt" not specified
…ed.de/images/eidosfanpage.gif" height="35px" width="100px" border="0"/></a></p>The attribute given above is required for an element that you've used, but you have omitted it. For instance, in most HTML and XHTML document types the "type" attribute is required on the "script" element and the "alt" attribute is required for the "img" element.
Typical values for type are
type="text/css" for <style>
and type="text/javascript" for <script>.
Line 278,
Column 79:
there is no attribute "hidefocus"
…mited.de/ltr3/ltr3.pdf" target="_blank" hidefocus="true">Tomb Raider 3</a><br/>You have used the attribute named above in your document, but the document type you are using does not support that attribute for this element. This error is often caused by incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Transitional" document type to get the "target" attribute), or by using vendor proprietary extensions such as "marginheight" (this is usually fixed by using CSS to achieve the desired effect instead).
This error may also result if the element itself is not supported in the document type you are using, as an undefined element will have no supported attributes; in this case, see the element-undefined error message for further information.
How to fix: check the spelling and case of the element and attribute, (Remember XHTML is all lower-case) and/or check that they are both allowed in the chosen document type, and/or use CSS instead of this attribute. If you received this error when using the <embed> element to incorporate flash media in a Web page, see the FAQ item on valid flash.
Line 282,
Column 127:
required attribute "alt" not specified
…araunlimited.de/images/reader_icon.gif" height="15" width="30" border="0"/></p>The attribute given above is required for an element that you've used, but you have omitted it. For instance, in most HTML and XHTML document types the "type" attribute is required on the "script" element and the "alt" attribute is required for the "img" element.
Typical values for type are
type="text/css" for <style>
and type="text/javascript" for <script>.
Line 288,
Column 30:
document type does not allow element "p" here; missing one of "object", "ins", "del", "map", "button" start-tag
<p style="padding-left:35px;">Lösung</p>The lost ArtefactThe mentioned element is not allowed to appear in the context in which you've placed it; the other mentioned elements are the only ones that are both allowed there and can contain the element mentioned. This might mean that you need a containing element, or possibly that you've forgotten to close a previous element.
One possible cause for this message is that you have attempted to put a block-level element (such as "<p>" or "<table>") inside an inline element (such as "<a>", "<span>", or "<font>").
Line 299,
Column 240:
required attribute "alt" not specified
…tle="Valid XHTML 1.0 Transitional" border="0" height="20" width="66" /></a></p>The attribute given above is required for an element that you've used, but you have omitted it. For instance, in most HTML and XHTML document types the "type" attribute is required on the "script" element and the "alt" attribute is required for the "img" element.
Typical values for type are
type="text/css" for <style>
and type="text/javascript" for <script>.
Line 301,
Column 189:
required attribute "alt" not specified
… title="Diese Seite ist optimiert für IE Auflösung 1024x768 bis 1360x768"/></p>The attribute given above is required for an element that you've used, but you have omitted it. For instance, in most HTML and XHTML document types the "type" attribute is required on the "script" element and the "alt" attribute is required for the "img" element.
Typical values for type are
type="text/css" for <style>
and type="text/javascript" for <script>.
Line 306,
Column 129:
element "iframe" undefined
…65px;" frameborder="no" scrolling="no">Sorry but your browser does not support…You have used the element named above in your document, but the document type you are using does not define an element of that name. This error is often caused by:
Line 309,
Column 27:
there is no attribute "loop"
<embed src="011.mp3" loop="false" autostart="true" hidden="true"></embed>You have used the attribute named above in your document, but the document type you are using does not support that attribute for this element. This error is often caused by incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Transitional" document type to get the "target" attribute), or by using vendor proprietary extensions such as "marginheight" (this is usually fixed by using CSS to achieve the desired effect instead).
This error may also result if the element itself is not supported in the document type you are using, as an undefined element will have no supported attributes; in this case, see the element-undefined error message for further information.
How to fix: check the spelling and case of the element and attribute, (Remember XHTML is all lower-case) and/or check that they are both allowed in the chosen document type, and/or use CSS instead of this attribute. If you received this error when using the <embed> element to incorporate flash media in a Web page, see the FAQ item on valid flash.
Line 309,
Column 59:
there is no attribute "hidden"
<embed src="011.mp3" loop="false" autostart="true" hidden="true"></embed>You have used the attribute named above in your document, but the document type you are using does not support that attribute for this element. This error is often caused by incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Transitional" document type to get the "target" attribute), or by using vendor proprietary extensions such as "marginheight" (this is usually fixed by using CSS to achieve the desired effect instead).
This error may also result if the element itself is not supported in the document type you are using, as an undefined element will have no supported attributes; in this case, see the element-undefined error message for further information.
How to fix: check the spelling and case of the element and attribute, (Remember XHTML is all lower-case) and/or check that they are both allowed in the chosen document type, and/or use CSS instead of this attribute. If you received this error when using the <embed> element to incorporate flash media in a Web page, see the FAQ item on valid flash.
Line 309,
Column 65:
element "embed" undefined
<embed src="011.mp3" loop="false" autostart="true" hidden="true"></embed>You have used the element named above in your document, but the document type you are using does not define an element of that name. This error is often caused by:
Line 310,
Column 5:
document type does not allow element "br" here; missing one of "p", "h1", "h2", "h3", "h4", "h5", "h6", "div", "pre", "address", "fieldset", "ins", "del" start-tag
<br/><br/><br/>The mentioned element is not allowed to appear in the context in which you've placed it; the other mentioned elements are the only ones that are both allowed there and can contain the element mentioned. This might mean that you need a containing element, or possibly that you've forgotten to close a previous element.
One possible cause for this message is that you have attempted to put a block-level element (such as "<p>" or "<table>") inside an inline element (such as "<a>", "<span>", or "<font>").
Line 310,
Column 10:
document type does not allow element "br" here; missing one of "p", "h1", "h2", "h3", "h4", "h5", "h6", "div", "pre", "address", "fieldset", "ins", "del" start-tag
<br/><br/><br/>The mentioned element is not allowed to appear in the context in which you've placed it; the other mentioned elements are the only ones that are both allowed there and can contain the element mentioned. This might mean that you need a containing element, or possibly that you've forgotten to close a previous element.
One possible cause for this message is that you have attempted to put a block-level element (such as "<p>" or "<table>") inside an inline element (such as "<a>", "<span>", or "<font>").
Line 310,
Column 15:
document type does not allow element "br" here; missing one of "p", "h1", "h2", "h3", "h4", "h5", "h6", "div", "pre", "address", "fieldset", "ins", "del" start-tag
<br/><br/><br/>The mentioned element is not allowed to appear in the context in which you've placed it; the other mentioned elements are the only ones that are both allowed there and can contain the element mentioned. This might mean that you need a containing element, or possibly that you've forgotten to close a previous element.
One possible cause for this message is that you have attempted to put a block-level element (such as "<p>" or "<table>") inside an inline element (such as "<a>", "<span>", or "<font>").
